Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO/MP time reset

 
SOLVED
Go to solution
uspfoms
Regular Advisor

ILO/MP time reset

How do I reset the date/time on RX servers ILO/MP?


Thanks
5 REPLIES 5
Murat SULUHAN
Honored Contributor

Re: ILO/MP time reset

Hi

http://docs.hp.com/en/5991-5984/5991-5984.pdf

HP Integrity and HP 9000
iLO MP Operations Guide

I hope it helps

Best Regards
Murat
Murat Suluhan
Torsten.
Acclaimed Contributor

Re: ILO/MP time reset

It depends ... on bigger systems the MP has its own clock, on smaller ones it gets the time from the running system.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
uspfoms
Regular Advisor

Re: ILO/MP time reset

Thanks for the reply's, I can't find it in the manual, I need to reset it on a RX3600 and a RX1620 the ILO time is hours off from the OS on these servers....

Thanks
Sameer_Nirmal
Honored Contributor
Solution

Re: ILO/MP time reset

iLO MP has it's own RTC. As mentioned in the iLO MP manual which says "The iLO 2 MP clock is updated from the BMC/SFW and cannot be modified. The realtime clock is used only when the iLO 2 MP is first powered on or rebooted, until it can obtain the correct date from the BMC."

Saying that you need to set the date/time using EFI shell commands "date" and "time".

uspfoms
Regular Advisor

Re: ILO/MP time reset

Thanks