Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO on rx3600 not responding via browser and partial via telnet

 
Doug_3
Frequent Advisor

ILO on rx3600 not responding via browser and partial via telnet

Hi, ILO on rx3600. I attempted to connect using the browser, it allows the log in but upon loading the web page: system status summary tab, the browser hangs.
I successfully telneted to the device and the VFP returns an "unknown" for all the data and a status of "Communication problem with BMC".

I would like to hear some advice on problem solving this issue. It was working before and no changes to the rx3600 have been made.

Is there any side effect to executing the RB command to reset the BMC service or an XD for the ILO MP? Would a reboot of the ILO be in order?

Thanks in advance, generous points (esp if you are polite).
2 REPLIES 2
avizen9
Esteemed Contributor

Re: ILO on rx3600 not responding via browser and partial via telnet

Doug_3
Frequent Advisor

Re: ILO on rx3600 not responding via browser and partial via telnet

Thank you.