1748148 Members
3611 Online
108758 Solutions
New Discussion юеВ

Re: ILO on rx3600

 
SOLVED
Go to solution
Paul Sperry
Honored Contributor

Re: ILO on rx3600

I get nothing with SSH
Torsten.
Acclaimed Contributor

Re: ILO on rx3600

Strange.

You say you did a firmware update, but you also say it is
F.02.11 Jul 13 2007.

Looks still old.

Current version is:



System FW : 04.03
BMC FW : 05.23
iLO-2 MP FW : F.02.17
PDH FW : 50.07
DHPC FW : 01.23
UCIO FW : 03.0b
HFC FW : 00.04

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul Sperry
Honored Contributor

Re: ILO on rx3600

Yes I update with rx3600_rx6600_4_03.depot
But your right it still looks old.
I'll look for the most recent and try the FW update again
Torsten.
Acclaimed Contributor

Re: ILO on rx3600

current version:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3257031&swItem=ux-61651-1&prodNameId=3257032&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=1

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul Sperry
Honored Contributor

Re: ILO on rx3600

Thanks for the link. I just finished the fw upgrade.

Current firmware revisions

MP FW : F.02.17
BMC FW : 05.23
EFI FW : ROM A 06.20, ROM B 07.12
System FW : ROM A 03.01, ROM B 04.03, Boot ROM B
PDH FW : 50.07
DHPC FW : 01.23
UCIO FW : 03.0b
PRS FW : 00.08 UpSeqRev: 0c, DownSeqRev: 08
HFC FW : 00.04 SetRev: 00


But still same problem. The I/O cand patr number is AB463-60003
Paul Sperry
Honored Contributor

Re: ILO on rx3600

That should have read:

The Core I/O card part number is AB463-60003
Torsten.
Acclaimed Contributor

Re: ILO on rx3600

Did you try to connect from another client?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul Sperry
Honored Contributor

Re: ILO on rx3600

yes serveral different clients/computers and same results :(
Torsten.
Acclaimed Contributor

Re: ILO on rx3600

I still have some doubts if the server is the culprit or not.

There is still a possibility that a firewall or the network config prevent you from accessing the server.

I would try to use a crossed LAN cable and connect a PC and the server directly. Make sure to disable any personal firewall on the PC and use IP addresses from the same subnet.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul Sperry
Honored Contributor

Re: ILO on rx3600


Even if I try to connect from the server its self I get the following:

Escape character is '^]'.
Local flow control off

*************************************************************************
This is a private system.
Do not attempt to login unless you are an authorized user.
Any authorized or unauthorized access or use may be monitored and can
result in criminal or civil prosecution under applicable law.
*************************************************************************

*************************************************************************
Only default users are configured.
Use one of the following user/password pairs to login:

Admin/Admin
Oper/Oper
*************************************************************************

MP login: Connection closed by foreign host.




At the login I cant type any thing in the it times out. Frustrating.