1748180 Members
4036 Online
108759 Solutions
New Discussion юеВ

Install HP-UX

 
Malyshev Alexandr
Occasional Contributor

Install HP-UX

Hi
Install Linux RH on rx1620 with SmartSetup-4.51. Now I want to install HP-UX. Boot from DVD HP-UX 11i:

Loading.: Internal Bootable CD/DVD
Starting: Internal Bootable CD/DVD

(C) Copyright 2004 Hewlett-Packard Development Company, L.P.All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.025

Press Any Key to interrupt Autoboot
\EFI\BOOT\AUTO ==> boot :IINSTALL
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 2036 MB
loading section 0


............................................................ (complete)
loading section 1
.............. (complete)
loading symbol table
loading ram disk file (:IINSTALLFS).
......................................................................................
(complete)
Launching :IINSTALL
SIZE: Text:26295K + Data:6286K + BSS:5388K = Total:37970K

Stop

How to set up console redirection?

In shell not command "acpiconfig"

Any idea.

Thanks
3 REPLIES 3
Joelmel Roche
Valued Contributor

Re: Install HP-UX

i think your using a vga console, you need to connect on serial port for terminal console using vt100 for OS installation
Sameer_Nirmal
Honored Contributor

Re: Install HP-UX

HPUX use MP serial console as default console.

You need to select MP serial console port for Input,Outputand Error using EFI Boot Manager Console configuration menu. The option for MP serial console would something like
Acpi( HWP..../UART..../(vt100).
Ensure that you have same and only one selection (*) in all 3 options (Input,Output and Error Consoles).

Once this selection is done, you can make use of Lan Console (if it is configured) for HPUX installation which is multiplexed with MP Serial console internally.

Refer this document.
http://docs.hp.com/en/AB430-96005/AB430-96005.pdf
http://docs.hp.com/en/A9901-96010/A9901-96010.pdf
Malyshev Alexandr
Occasional Contributor

Re: Install HP-UX

Thanks,
all OK.