Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Install HPUX on rx2620

 
Nguyen Anh Tien
Honored Contributor

Install HPUX on rx2620

Hi All
Pls help to show me how to install HPUXv2 (11.23) on rx2620. Defauld OS at factory for this server is Windows2K and support for linux.

When I install HPUXV2 on this machine. It seem to be hang at bellow step:
++++++++++++++++++++++++++
........... (complete)
loading symbol table
loading ram disk file (:IINSTALLFS).
.........................................................
(complete)
Launching :IINSTALL
SIZE: Text:24784K + Data:5919K + BSS:5364K = Total:36068K

Console is on a Serial Device
Booting kernel...

HP-UX will call firmware in physical-addressing mode

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 16364 MB 16364 MB 16364 MB
Kernel : 16364 MB 16364 MB 16364 MB
User : 15340 MB 13368 MB 13420 MB
-------------------------------------------------------------------------

Loaded ACPI revision 2.0 tables.
krs_read_mfs: Error 5 opening MFS.
WARNING: GIO: read_ioconfig_file(): /stand/ioconfig read error.
ioconfig = NULL
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
CISS: RAID SA controller on hardware path 0/2/1/0/4/0 is now online.
iether0: INITIALIZING HP PCI-X 1000Base-T Dual-port Built-in at hardware path 0
/1/2/0
iether1: INITIALIZING HP PCI-X 1000Base-T Dual-port Built-in at hardware path 0
/1/2/1

System Console is on the Built-In Serial Interface
Swap device table: (start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured. Dump is disabled.
Starting the STREAMS daemons-phase 1
execve("/sbin/sh") failed, errno 0xffffffff
execve("/bin/sh") failed, errno 0xffffffff
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 16756872 Kbytes, lockable: 12487628 Kbytes, available: 14604648 Kb
ytes


THank you in advance
HP is simple
2 REPLIES 2
Asif Sharif
Honored Contributor

Re: Install HPUX on rx2620

Nguyen Anh Tien
Honored Contributor

Re: Install HPUX on rx2620

I found the caused.
rx2620 use hpux 11.23 Sept 2006 or higher
THanks
HP is simple