Integrity Servers
1753506 Members
5287 Online
108794 Solutions
New Discussion юеВ

Re: Installation Problems

 
Torsten.
Acclaimed Contributor

Re: Installation Problems

The blk device is listed, so the system "see" the device. Strange. It is the correct DVD 1? Try to power cycle the server and check the mapping again.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
FOBF
Frequent Advisor

Re: Installation Problems

Yes, that what i said, is very strange, i tried with another media installation disk, i reboot the server, power off and map again with another disk but the server does see the media.

I have not tried with another DVD unit, but i do not think DVD unit problem becouse the server see the dvd unit from single user and efi shell.


Torsten.
Acclaimed Contributor

Re: Installation Problems

AFAIR there was a possible problem with the drive, but I'm not sure.

How about firmware?

Current version is

MP:CM> sysrev

MP FW : E.03.32
BMC FW : 01.30
EFI FW : 03.20
System FW : 03.33

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
FOBF
Frequent Advisor

Re: Installation Problems

FW Version

MP:CM> sysrev

SYSREV

Current firmware revisions

MP FW : E.02.23
BMC FW : 01.30
EFI FW : 03.20
System FW : 03.21

MP Host Name: mgserver
MP:CM>