Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Installation Problems

 
FOBF
Frequent Advisor

Installation Problems

hello.

I am trying to install hp-ux v2 in a Integrity server but i can see the install.efi from dvd, From EFI shell:
Shell> reconnect -r
Shell> map -r

My problem is all fsx: mapped are from disk, there is not any from DVD unit, and then i can not get in to dvd fsn:
I am sure i am using the right DVD's

Any advice.
13 REPLIES 13
rick jones
Honored Contributor

Re: Installation Problems

Probably an obvious question, but I'll ask - is there no "Boot from Internal DVD" option in the EFI boot menu?

Presuming one of those discs has an OS, if you boot that OS, can you see the DVD from that OS?
there is no rest for the wicked yet the virtuous have no pillows
Taifur
Respected Contributor

Re: Installation Problems

Hi ,

You can check below for OS installing
http://docs.hp.com/en/5991-2701/index.html


Rgds//
Taifur
FOBF
Frequent Advisor

Re: Installation Problems

He rick.

Thank for your help.

When a boot in Single User Mode i can see the DVD unit, in fact, i can mount the dvd and browser into dvd files, but when i try to boot from dvd into shell efi the dvd unit does not show me like a fsn, the only devices that appears are HD.

Is like a i put the wrong disk or the disk in not a OS disk

Torsten.
Acclaimed Contributor

Re: Installation Problems

seeing is believing ... ;-) Can you post the result of "map -r" and tell what server you have?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Installation Problems

BTW, to compare the pathes you can use

# ioscan -fne

from hp-ux.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
FOBF
Frequent Advisor

Re: Installation Problems

No problem, here the output

Shell> map -r
Device mapping table
fs0 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig22154EBE-2156-11DE-8002-D6217B60E588)
fs1 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig22154F04-2156-11DE-8004-D6217B60E588)
fs2 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun2,Lun0)/HD(Part1,Sig6CCAD274-2C61-11DE-8002-D6217B60E588)
blk0 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun0,Lun0)
blk1 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig22154EBE-2156-11DE-8002-D6217B60E588)
blk2 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part2,Sig22154EDC-2156-11DE-8003-D6217B60E588)
blk3 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig22154F04-2156-11DE-8004-D6217B60E588)
blk4 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun2,Lun0)
blk5 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun2,Lun0)/HD(Part1,Sig6CCAD274-2C61-11DE-8002-D6217B60E588)
blk6 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun2,Lun0)/HD(Part2,Sig6CCAD2B0-2C61-11DE-8003-D6217B60E588)
blk7 : Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun2,Lun0)/HD(Part3,Sig6CCAD2E2-2C61-11DE-8004-D6217B60E588)
blk8 : Acpi(HWP0002,0)/Pci(2|1)/Scsi(Pun3,Lun0)
blk9 : Acpi(HWP0002,100)/Pci(1|0)/Pci(1|1)/Scsi(Pun0,Lun0)
blkA : Acpi(HWP0002,100)/Pci(1|0)/Pci(1|1)/Scsi(Pun2,Lun0)

Shell>

And then from Single User:

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
disk 0 0/0/2/0.0.0 sdisk CLAIMED DEVICE HP 36.4GMAS3367NC
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
/dev/dsk/c0t0d0s1 /dev/rdsk/c0t0d0s1
/dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3
disk 2 0/0/2/0.2.0 sdisk CLAIMED DEVICE HP 36.4GST336753LC
/dev/dsk/c0t2d0 /dev/rdsk/c0t2d0
/dev/dsk/c0t2d0s1 /dev/rdsk/c0t2d0s1
/dev/dsk/c0t2d0s2 /dev/rdsk/c0t2d0s2
/dev/dsk/c0t2d0s3 /dev/rdsk/c0t2d0s3
disk 4 0/0/2/1.3.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c1t3d0 /dev/rdsk/c1t3d0
disk 1 0/1/1/0/1/1.0.0 sdisk CLAIMED DEVICE HP 36.4GMAS3367NC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0
disk 3 0/1/1/0/1/1.2.0 sdisk CLAIMED DEVICE HP 36.4GMAS3367NC
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
#
FOBF
Frequent Advisor

Re: Installation Problems

Hello

I forget, my server is a rx5670.

Thanks
Torsten.
Acclaimed Contributor

Re: Installation Problems

Please do a

# ioscan -fneC disk

note the "e"!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
FOBF
Frequent Advisor

Re: Installation Problems

Hi

Here the output

# ioscan -fneC disk
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
disk 0 0/0/2/0.0.0 sdisk CLAIMED DEVICE HP 36.4GMAS3367NC
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
/dev/dsk/c0t0d0s1 /dev/rdsk/c0t0d0s1
/dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3
Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig22154EBE-2156-11DE-8002-D6217B60E588)/\EFI\HPUX\HPUX.EFI
disk 2 0/0/2/0.2.0 sdisk CLAIMED DEVICE HP 36.4GST336753LC
/dev/dsk/c0t2d0 /dev/rdsk/c0t2d0
/dev/dsk/c0t2d0s1 /dev/rdsk/c0t2d0s1
/dev/dsk/c0t2d0s2 /dev/rdsk/c0t2d0s2
/dev/dsk/c0t2d0s3 /dev/rdsk/c0t2d0s3
Acpi(HWP0002,0)/Pci(2|0)/Scsi(Pun2,Lun0)/HD(Part1,Sig6CCAD274-2C61-11DE-8002-D6217B60E588)/\EFI\HPUX\HPUX.EFI
disk 4 0/0/2/1.3.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c1t3d0 /dev/rdsk/c1t3d0
Acpi(HWP0002,0)/Pci(2|1)/Scsi(Pun3,Lun0)
disk 1 0/1/1/0/1/1.0.0 sdisk CLAIMED DEVICE HP 36.4GMAS3367NC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0
Acpi(HWP0002,100)/Pci(1|0)/Pci(1|1)/Scsi(Pun0,Lun0)
disk 3 0/1/1/0/1/1.2.0 sdisk CLAIMED DEVICE HP 36.4GMAS3367NC
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
Acpi(HWP0002,100)/Pci(1|0)/Pci(1|1)/Scsi(Pun2,Lun0)
#

Thanks
Torsten.
Acclaimed Contributor

Re: Installation Problems

The blk device is listed, so the system "see" the device. Strange. It is the correct DVD 1? Try to power cycle the server and check the mapping again.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
FOBF
Frequent Advisor

Re: Installation Problems

Yes, that what i said, is very strange, i tried with another media installation disk, i reboot the server, power off and map again with another disk but the server does see the media.

I have not tried with another DVD unit, but i do not think DVD unit problem becouse the server see the dvd unit from single user and efi shell.


Torsten.
Acclaimed Contributor

Re: Installation Problems

AFAIR there was a possible problem with the drive, but I'm not sure.

How about firmware?

Current version is

MP:CM> sysrev

MP FW : E.03.32
BMC FW : 01.30
EFI FW : 03.20
System FW : 03.33

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
FOBF
Frequent Advisor

Re: Installation Problems

FW Version

MP:CM> sysrev

SYSREV

Current firmware revisions

MP FW : E.02.23
BMC FW : 01.30
EFI FW : 03.20
System FW : 03.21

MP Host Name: mgserver
MP:CM>