HPE Community
Integrity Servers
1752822 Members
4372 Online
108789 Solutions
New Discussion юеВ

Re: Installing and running Xenserver on RX2600, RX7620, and RX8620

 
Daniel E C
New Member

тАО11-10-2010 12:00 PM

тАО11-10-2010 12:00 PM

Installing and running Xenserver on RX2600, RX7620, and RX8620

Can we install and run Xenserver on RX2600, RX7600, and RX8620? If yes, are there some docs that provide instruction and tips? Thanks.

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО11-10-2010 12:59 PM

тАО11-10-2010 12:59 PM

Re: Installing and running Xenserver on RX2600, RX7620, and RX8620

Somehow I doubt that any other virtualization other than HPVM runs on Itanium hardware - ask the vendor.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Michal Kapalka (mikap)
Honored Contributor

тАО11-10-2010 11:59 PM

тАО11-10-2010 11:59 PM

Re: Installing and running Xenserver on RX2600, RX7620, and RX8620

hi,

check this ( very old ) docu :

http://www.xen.org/files/Xenia64_HP_DMagenheimer.pdf

and personally i think :

Unfortunately not - XenServer requires an x86-64 based processor with Intel VT or AMD-V extensions.

mikap
0 Kudos
Reply
Bhadresh
Trusted Contributor

тАО11-11-2010 09:59 PM

тАО11-11-2010 09:59 PM

Re: Installing and running Xenserver on RX2600, RX7620, and RX8620

Hi,

Have a look at the following link:
http://wiki.xensource.com/xenwiki/XenIA64/HowTo

Hope it helps.

Regards,
Bhadresh
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.