Integrity rx3600 HPUX installation

[Alex_santa]

Hi;

I have an rx3600 Integrity server that came with Windows OS from factory, i need to
change the OS to HPUX and have the media kit
of HPUX 11i Version 2 from March 2006.

When tried to install this OS it does not
see the hard disks and cannot finish the installation.

The server has a built in array with 04 disks configured in RAID 0+1.

Please if some of you know how to configure it from the EFI?


Best Regards

[Torsten.]

Hi,

your server is not in the supported systems list for the march release, because the server is newer and was not available in march.
http://docs.hp.com/en/5991-6741/ch04s10.html

You need the september 2006 release of HP-UX:
http://docs.hp.com/en/5991-5535/ch04s07.html

[Torsten. · Accepted solution]

Just to explain: your disk drives are SAS (serial attached SCSI) and the earlier version doesn't have the driver.

[Alex_santa]

Torsten;

Many thanks for your response, i agree with
you, this is my situation with this server.

An additional question:

¿Do you know if it is possible to download this OS Release from some ftp site at HP?


Best Regards;


Alexander Santamaria

[Alex_santa]

Have to change de SAS controller to a compatible version for HPUX.