Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Integrity server iLO 2 Virtual media

 
imansour
Occasional Visitor

Integrity server iLO 2 Virtual media

Hello,

Is it possible to mount an integrity iLO2 virtual media by using a script? In other words, what is the CLI command used to mount virtual media, if any exists?
I am trying to install HP-UX of an ISO image, but I would like to script this process.

Thank you
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Integrity server iLO 2 Virtual media

You need to present the virtual media, then detect it at EFI level and boot from - where should your script run? On EFI level?

You can automate the install with ignite server, but IMHO not from an ISO.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jozef_Novak
Respected Contributor

Re: Integrity server iLO 2 Virtual media

Hello,

you need to go through a lot of options in the installation interface and I doubt that this can be scripted. If you are deploying a bunch of servers, then you should use an ignite server.

J.
Nathan Baca
Occasional Visitor

Re: Integrity server iLO 2 Virtual media

You can connect virtual media via the cli if you have the iLO2 Advanced licensing enabled. The commands should be "vm cdrom insert URL_TO_ISO" and "vm cdrom set connect".

Hope that helps. I had to spend some time figuring this out and ran into this post.

Thanks, Nate