HPE Community
Integrity Servers
1751765 Members
4613 Online
108781 Solutions
New Discussion

Internal Raid Ctrl Smart Array P400 AD248A

 
RASE_1
Advisor

‎09-17-2009 04:00 AM

‎09-17-2009 04:00 AM

Internal Raid Ctrl Smart Array P400 AD248A

Dear,

We get an Itanium server, running HPUX 11.23, with 6 internal disks and the Smart Array P400 Ctrl for the Raid management.

We would like to add two internal disks, and configure those disks whithout stopping or rebooting the server.

Is there any way to get access to the Smart Array Ctrl Interface from the running operating system, or from any web browser ?

Thanks.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎09-17-2009 04:04 AM

‎09-17-2009 04:04 AM

Re: Internal Raid Ctrl Smart Array P400 AD248A

The tools are

# saconfig

# sautil

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.