Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Itanium hardware path to physical slot maps

 

Itanium hardware path to physical slot maps

Is there a convenient or easy way to determine which physical slot a hardware path maps to on rxXX40 server? I have an rx7640 in 2 nPars and an rx8640 in one partition. Any help will be appreciated.

 

P.S. This thread has been moved from HP 9000 to Servers > Integrity. -HP Forum Moderator

5 REPLIES 5
Sandman!
Honored Contributor

Re: Itanium hardware path to physical slot maps

Please attach the output of the full ioscan listing on your servers.

# ioscan

~thanks

Re: Itanium hardware path to physical slot maps

The attached file has the rx7640 partitions and an rx8640.
Sandman!
Honored Contributor

Re: Itanium hardware path to physical slot maps

The ioscan listing on rx7640 partition 0 for example shows that the FC card is connected to the PCI-X slot 8 on partition/cell 0.

0/0/8/1/0 fcd CLAIMED INTERFACE HP A6826-60001 2Gb Dual Port PCI/PCI-X

Check out the HP tech doc below for more info:

http://docs.hp.com/en/AB312-9001B/ch01s01.html#babgfieh

~hope it helps

Re: Itanium hardware path to physical slot maps

Yes, thank you!

Re: Itanium hardware path to physical slot maps

That document was just what I needed.