Integrity Servers
1748140 Members
3439 Online
108758 Solutions
New Discussion

Re: LUNs are not appearing in the EFI shell

 
shashi kanth
Super Advisor

LUNs are not appearing in the EFI shell

I have installed OpenVMS on the top of a EVA LUN. But those LUNs are not appearing in the EFI shell. "devtree" command doesn'r shows my Fiber channel adapters.

What is the issue with my box? Do i need to upgrade some sort of firmware ?

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: LUNs are not appearing in the EFI shell

This may help you:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1168312

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!