Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

MP Console on rx 8640

 
Sakui
Frequent Advisor

MP Console on rx 8640


I have a rx 8640 with two cell board installed. I connected to MP console to configured an ip address for the MP LAN. After configuring the Ip address , subnet mask and default gateway. I can't ping or connect to the MP LAN through telnet or web browser. Is there any security issue on this series of intergrity servers.When i do ls command , i can see all the setting i configured on that interface.
The cables are all fine and blinking green lights
4 REPLIES 4
Mridul Shrivastava
Honored Contributor

Re: MP Console on rx 8640

Insure that machine is on the same network ie have the same subnet mask as of MP LAN?

If its on different network then there would be issue.
Time has a wonderful way of weeding out the trivial
Jeeshan
Honored Contributor

Re: MP Console on rx 8640

Hi

check the ip address and subnet mask u have used.

and also if your subnet , where u access from and the MP subnet is same or if not same, routing must be there.
a warrior never quits
YAQUB_1
Respected Contributor

Re: MP Console on rx 8640

Hi Sakui,

check the below URL site:-
http://docs.hp.com/en/AB464 9003C/ch03s07.html

Hope it will help for U.

Thanks--Yaqub
I am a Customer Advocate!!!
YAQUB_1
Respected Contributor

Re: MP Console on rx 8640

Sorry,

http://docs.hp.com/en/AB464-9003C/ch03s07.html

Now, U access above link.....