MP Console

[kunjuttan]

How can I able to login to an MP Console??

[Michal Kapalka (mikap)]

hi,

via serial console or LAN.

mikap

[Michal Kapalka (mikap) · Accepted solution]

hi,

check this link :

http://docs.hp.com/en/5991-6006/index.html

mikap

[Jupinder Bedi]

if your console is already attached to the serial port than you need to login as Admin user and by default password is also Admin

login Admin
password Admin


Best of luck

[Michal Kapalka (mikap)]

hi,

if you are connect via LAN telnet s the default protocol for usage, but if you have license you could use also SSH, in some models its automatically.

mikap

[Vishu]

Two ways to connect to MP.

1. Serial port
2. LAN

from console, you can also use ctrl+B to go to MP.

[Michael Steele_2]

http://docs.hp.com/en/A5201-90017/index.html

[Hakki Aydin Ucar]

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1398530

For commands go to page:
http://www.docs.hp.com/en/5185-4391/ch03s06.html

[Dennis Handly]

What kind of server to you have? PA, Integrity or Blade?

[Horia Chirculescu]

>from console, you can also use ctrl+B to go to MP.

And back to console from MP, with the command:

co