MP Console

[Jupinder Bedi]

when you login into the console , you can use co to see the partitions name . than you need to select the partition name and than provide the login and password of the server. If you want to come back to console again than use CTRL B and if you want to toggle between the partitions use CTRL A

[TARUN SHARMA_1]

You can use telnet or ssh-2 to connect to LAN console and for serial you need to use hyperterminal through serial cable.
Here it looks like
root@server1:/root_home> telnet server2_gsp
Trying...
Connected to b1_gsp.
Escape character is '^]'.
Local flow control off


MP login: Admin
MP password:

* Your connection is via Telnet. For improved security this MP *
* now supports SSH-2. Telnet can be disabled via the SA command. *

(c)Copyright 2000 Hewlett-Packard Co., All Rights Reserved.

Welcome to
Superdome's Management Processor


Utility Subsystem FW Revision Level: 15.20



MP MAIN MENU:

CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
FW: Firmware Update
HE: Help
X: Exit Connection

[nserver2-mgt] MP> co

Partitions available:

# Name
--- ----
0) server1
1) server2
2) server3
Q) Quit

Please select partition number: