Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

MP LAN IP cannot change on rx2620

 
Shibin_2
Honored Contributor

MP LAN IP cannot change on rx2620

Hi All,

I have a serious problem. I have configured the MP LAN with an IP 10.0.0.161, but when I tried to access, cannot. Later found through SMH, MP picked the IP 10.0.0.5, which I have never assigned or used. However, I am not able to connect MP using the IP 10.0.0.5. This IP not pingable or accessible. LAN connection shows no problem; all lights are ok. How do I change this IP?

I have tried to connect console via RS232, but nothing is coming in hyperterminal. Tried using the default mp access option ( ie telnet mp ) but no luck. Tried to reset MP via the button and checked, nothing is happening.

How do I change this IP?
Regards
Shibin
1 REPLY 1
Shibin_2
Honored Contributor

Re: MP LAN IP cannot change on rx2620

I had to pull out all network cables and connect one by one to get the connectivity to this IP and thus changed it.
Regards
Shibin