Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

MP Time on an rx2600

 
Ray Carlson
Frequent Advisor

MP Time on an rx2600

Does anyone know how to set the time that is recorded by the Event log in MP? I have stopped at EFI shell and set date and time there. If I do a reset, that date and time will go for that boot. However, the next boot will change the date and time back to what it was previously, which was 1 day, 4 hours, & 45 minutes earlier than the real time.
Any ideas?
2 REPLIES 2
Berlene Herren
Honored Contributor

Re: MP Time on an rx2600

Hello Ray,

Have you tried booting into hp-ux and setting the time? Does it always go back to 1 day, 4 hours and 45 minutes earlier? I was thinking the battery, but not if it is this consistent.

Berlene
http://www.mindspring.com/~bkherren/dobes/index.htm
Highlighted
Ray Carlson
Frequent Advisor

Re: MP Time on an rx2600

Just for peoples information, the solution was a firmware upgrade. Unfortunately, the firmware upgrade broke the dump ability. However a new patch then fixed the dump problem. It's always fun to be on the front line.
Ray