Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

MP access from OS

 
Laks
Occasional Advisor

MP access from OS

Hi All,

We are using HP RX2660 Server with HP UX 11iV3. And we have configured and been using MP Console login so far.
All of a sudden, we are not able to connect to the MP console via telnet.
So, to check the MP Config settings, is there a way to check from the OS.
Regards,
Lakshmi
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: MP access from OS

It's not clear to me - are you able to access MP or not?

What is your console device?

(Look into syslog and search for something like "console is on ...")

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Laks
Occasional Advisor

Re: MP access from OS

Hi Torsten,

I try to connect to the Management Processor IP via telnet from remote location.
Now, when I telnet, i'm not able to connect to the MP IP.
The Server is up and running, and I do ssh to access the server Operating System.

So, to check the MP IP settings, i wanted to know if there are commands to access MP settings

Regards,
Lakshmi
Torsten.
Acclaimed Contributor

Re: MP access from OS

Not really. Try to get the IP from SMH - this doesn't work with all servers.

You can try to access via ssh or web browser meanwhile.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!