MP login and GSP

[Mridul Dutta]

Hi ALl,

Is there any difference between MP login and GSP?

what are the differences in between.

Sorry If i raised silly question here.

[Lijeesh N G_1 · Accepted solution]

Hi,

There is no difference in login between MP and GSP, the main thing is; MP(Management Proceesor) is used in Itanium based servers;i mean Itegrity servers and GSP(Guardian Service processor) is used in PA-RISC based servers to manage.

Regards,
LIJEESH N G

[Mridul Dutta]

Thanks much.

so All commands that are available in GSP same with MP ?

Command like

CO>> Console selection
MA>> Main menu
PS>> Display detailed power and hardware configuration status
PE>Power entities on or off
CL>>Console log

Thanks ,,

[Lijeesh N G_1]

Hi,

http://docs.hp.com/en/A5201-90017/apas01.html

Regards
LIJEESH N G

[Lijeesh N G_1]

Hi,

I forget to tell you one thing, now all new PA-RISC servers also using MP.Find below thread for the list of some those servers.
All Itegriry servers are using MP.

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1249531030465+28353475&threadId=1354815

Regards,
LIJEESH N G

[Torsten.]

All this is different generation hardware.

At the very first beginning (~10 years ago) there were a SP (service processor) and AP (accessport), followed by GSP (guardian service processor) and nowadays MP (management processor) and iLO / iLO2.

[SoorajCleris]

what are the differences in between.

GSP used in ALN and OLD SD.
MP is used in ZX1/ZX2 SX1000/SX2000 platform servers

MP has more capabilities.

Regards,
Sooraj