cancel
Showing results for 
Search instead for 
Did you mean: 

MP .. putty

 
SOLVED
Go to solution
katie1
Frequent Advisor

MP .. putty

Just like to get some tips,
when connecting to MP with putty .. via telnet, are there any "preferred setting" for Integrity or Risc cell based servers ,

I would be using putty from Vista regards to settings windows columns rows 26 etc
and control h for backspace


Basically so the putty screen shows a lot of lines without corruption/ glitches ,and max amount of line possible on screen ,

I would be getting cell & cabinet info from MP with CP PS commands etc
they show a sketch i would like to keep that in the putty log in the correct format, (so it looks clear and does not move the lines across

as this out put will be saved to putty logs for referance,

regards KT1,
points assigned to all answers,,

3 REPLIES 3
wobbe
Respected Contributor
Solution

Re: MP .. putty

Try a different translation setting.
UTF-8 or font encoding usually works for me.
cnb
Honored Contributor

Re: MP .. putty

I use Putty pretty much "out of the box" from XP for MP access with any issues. When using serial ports, keep XON/XOFF flow control and you should be fine.

Rgds,
katie1
Frequent Advisor

Re: MP .. putty

thanks got it sorted , it just does not like the window expanded at times messes with the emulation ,
regards
KT1