Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Managment Processor(MP) console stays in booting kernel

 
trytosolve
Frequent Advisor

Managment Processor(MP) console stays in booting kernel

While booting from Media first time it worked fine - Installed HP-UX 11.31 0709 and installed correctly after the reboot the MP console reads
"Console is on Serial Device - via PCDP
Booting kernel..."

stays for ever, so tried to re-install, so booted the OS using internal DVD, and no luck its stays in the same place

Please help
4 REPLIES 4
Sameer_Nirmal
Honored Contributor

Re: Managment Processor(MP) console stays in booting kernel

What's the model of the Integrity server you are dealing with?

Have you checked the Console, Input and Output devices selection in the Boot option maintenance menu?

http://www.docs.hp.com/en/5187-2725/ch04s03.html

trytosolve
Frequent Advisor

Re: Managment Processor(MP) console stays in booting kernel

The system is 4640 and this worked on the first install i did not do any changes and i got this on the reboot of the system

Khairy
Esteemed Contributor

Re: Managment Processor(MP) console stays in booting kernel

hi,

need more info about yr rx4640. Do you have graphic adapter installed?

if you do have it installed (usually in slot 8 - type ATI Radeon), can you interrupt the boot process and go to EFI menu and choose 'select the console output device(s)'.

I don't have a rx4640 here to check but my guess your graphic adapter will be :

Acpi(HWPxxxx,x00)/Pci(5|0)

Choose this and your console will be set to your graphic adapter.

Rgds
trytosolve
Frequent Advisor

Re: Managment Processor(MP) console stays in booting kernel

Hi Khairy,

I do not have add-on graphics card, the system have on board VGA and MP

thanks