Migrated Disk from one SAN Box to another SAN Box doesn't boot (BL870c)

[Wiertelarz]

Hello,

i've got the following problem.

I got a BL870c with OS Windows 2003 IA 64 with san boot. Now i have migrated the boot disk to another san box. As I switched the BL870c to the other san box i get the follwing error message:

Loading.: Windows Server 2003, Enterprise VNX

Starting: Windows Server 2003, Enterprise VNX
Windows could not start because there was an error reading
the boot settings from NVRAM.

Please check your firmware settings. You may need to restore your
NVRAM settings from a backup.

After the disk was migrated i have done the following:

bootcfg /clone /sg {68d298c0-1b6a-01c1-507b-9e5f8078f531} /tg {476688c5-8ebf-47d2-80e7-cf9d06 5edb81} /d+ Cloned_Entry  with my own GUIDs

Thanks for help,

Thomas

[S_Logan]

Hi,

Please check this MS article, it may be useful:

http://support.microsoft.com/kb/814070

HTH,

Surendar

Was the post useful? Click on the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt