Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Montecito or Montvale processor

 
SOLVED
Go to solution
Trojan36
Frequent Advisor

Montecito or Montvale processor

I need to add some CPU cores to my rx7640 server, but I forgot the type of CPU is currently in the rx7640. Is there a unix command I can use to let me know the type of CPU I currently have? I just know that is the 1.6GHz processor. The Montecito and the Montvale is not mixable even on a separate cell board, is that correct? Thx in advance.
2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: Montecito or Montvale processor

Use

# machinfo

Example:

# /usr/contrib/bin/machinfo
CPU info:
32 Intel(R) Itanium 2 9000 series processors (1.6 GHz, 18 MB)
533 MT/s bus, CPU version C2
64 logical processors (2 per socket)

...
or

# machinfo
CPU info:
2 Intel(R) Itanium 2 9100 series processors (1.67 GHz, 18 MB)
666 MT/s bus, CPU version A1
4 logical processors (2 per socket)

...

9000 series processor = Montecito
9100 series processor = Montvale

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Montecito or Montvale processor

Forgot to say the only system where you can mix different CPUs in different nPars under special circumstances is the superdome server.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!