Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Need CPU information on superdome

 
kiran b jadhav
Frequent Advisor

Need CPU information on superdome

Need CPU information on superdome like cpu speed, core information...

How to get this information
11 REPLIES 11
kiran b jadhav
Frequent Advisor

Re: Need CPU information on superdome

model: ia64 hp superdome server SD32B
kiran b jadhav
Frequent Advisor

Re: Need CPU information on superdome

I know with machinfo command we can get Clock speed but what about core information. How to know whether it is single core or dual core etc...
Matti_Kurkela
Honored Contributor

Re: Need CPU information on superdome

The machinfo output will identify the CPU model. Then use this table of Itanium 2 CPU models to see the number of cores.

http://en.wikipedia.org/wiki/Itanium_2#Released_processors

Alternatively, run "parstatus" and look at how many CPUs each cell has. Each cell has 4 physical CPU sockets, so if "parstatus" says the cell has 8 CPUs, then those must be 4 dual-core CPUs.

MK
MK
kiran b jadhav
Frequent Advisor

Re: Need CPU information on superdome

Here is parstatus output:

Note: No action specified. Default behavior is display all.
[Complex]
Complex Name : Complex 1
Complex Capacity
Compute Cabinet (8 cell capable) : 1
Active MP Location : cabinet 0
Original Product Name : superdome server SD32B
Original Serial Number : SGH48430CW
Current Product Order Number : A9834A
OEM Manufacturer :
Complex Profile Revision : 1.0
The total number of partitions present : 1


[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status MP
=== ============ ========= ========= ========== ============ ======
0 8 cell slot 4/0/N+ 5/0/N+ 6/0/N+ 2/0/N+ Active

Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.
HO = Housekeeping only; The power is in a standby state.
NA = Not Applicable.


[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Core 8/0/8 40.0/0.0 cab0,bay1,chassis3 yes yes 0
cab0,cell1 Active Base 8/0/8 40.0/0.0 - no yes 0
cab0,cell2 Active Base 8/0/8 40.0/0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell3 Active Base 8/0/8 40.0/0.0 - no yes 0
cab0,cell4 Absent - - - - - -
cab0,cell5 Absent - - - - - -
cab0,cell6 Absent - - - - - -
cab0,cell7 Active Base 8/0/8 32.0/0.0 - no yes 0

Notes: * = Cell has no interleaved memory.


[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0 Absent - - -
cab0,bay0,chassis1 Active - cab0,cell2 0
cab0,bay0,chassis2 Absent - - -
cab0,bay0,chassis3 Absent - - -
cab0,bay1,chassis0 Absent - - -
cab0,bay1,chassis1 Absent - - -
cab0,bay1,chassis2 Absent - - -
cab0,bay1,chassis3 Active - cab0,cell0 0


[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 Active 5 2 cab0,cell0 PARTITION 0


[Partition - HyperThread]
Par Num Hyperthreading Enabled Hyperthreading Active
======= ====================== =====================
0 no no
Torsten.
Acclaimed Contributor

Re: Need CPU information on superdome

Please provide machinfo information.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
kiran b jadhav
Frequent Advisor

Re: Need CPU information on superdome

CPU info:
Number of CPUs = 40
Clock speed = 1598 MHz
Bus speed = 533 MT/s
CPUID registers
vendor information = "GenuineIntel"
processor serial number = 0x0000000000000000
processor version info = 0x0000000020010104
architecture revision: 0
processor family: 32 Intel(R) Itanium 2 9100 series
processor model: 1 Intel(R) Itanium 2 9100 series
processor revision: 1 Stepping A1
largest CPUID reg: 4
processor capabilities = 0x0000000000000005
implements long branch: 1
implements 16-byte atomic operations: 1
Bus features
implemented = 0xbdf0000020000000
selected = 0x0020000000000000
Exclusive Bus Cache Line Replacement Enabled

Cache info (per core):
L1 Instruction: size = 16 KB, associativity = 4
L1 Data: size = 16 KB, associativity = 4
L2 Instruction: size = 1024 KB, associativity = 8
L2 Data: size = 256 KB, associativity = 8
L3 Unified: size = 9216 KB, associativity = 9
Torsten.
Acclaimed Contributor

Re: Need CPU information on superdome

processor family: 32 Intel(R) Itanium 2 9100 series


This is dual core (Montvale) CPU.


The Intel series 9000 and 9100 are dual core, the 9300 series is quad-core (only for superdome 2).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Need CPU information on superdome

BTW, if you see this line from your previous output:


cab0,cell1 Active Base 8/0/8 40.0/0.0 - no yes 0


you see 8 cores per cell, but the cell has 4 slots - must be a dual core CPU.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
cnb
Honored Contributor

Re: Need CPU information on superdome

Hi,

FYI in case you need this too;

Here's the Superdome Quickspec that gives a nice overview:

http://h18000.www1.hp.com/products/quickspecs/11717_div/11717_div.html

Rgds,
Robert_Jewell
Honored Contributor

Re: Need CPU information on superdome

Another means of obtaining CPU info is from the MP command menu. This is good if you dont have access to the OS.

MP:CM> DF
Select S, then M, then choose a CPU.

You will see info such as:

Part Number : AB364-62302
Serial Number : PR107439BE
FRU Name : MAD9A2-9M

Its not pretty, but gets you there...

-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!
Innate Ideas
Occasional Visitor

Re: Need CPU information on superdome

 

Depending on what version of HP-UX you are running you could use the cprop command:

 

/opt/propplus/bin/cprop -detail -c Processors