Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Not able to find DVD mapping in EFI shell

Highlighted
binu_mathew
Frequent Advisor

Not able to find DVD mapping in EFI shell

Hi ,

I am trying to its install hpux 11iv3 in rx2600 . Currently it is running with 11iv2 .But when I go to efi shell , I am not able to find the DVD mapping in EFi shell . I tried with reconnect -r and map -r .. still is not showing anything . i could see that DVD is working fine . Because I was able to install some patch from DVD drive . Please some one help me to fix the issue

 

In EFI shell I can see only below entries , at the same time ioscan -e command show the DVD output from OS

 

ioscan -e output

 

0/0/2/0.0.0.0                     disk      TEAC    DV-28E-B
        Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)

 

reconnect -r

 

Scsi(Pun0,Lun0) HP 36.4GST336753LC      HPC3 (320 MBytes/sec)
Scsi(Pun1,Lun0) HP 36.4GST336753LC      HPC3 (320 MBytes/sec)
Scsi(Pun2,Lun0) HP 73.4GST373453LC      HPC3 (320 MBytes/sec)
ReconnectController(0,0,0) : Status = Success

 

fs0:\> map -r
Device mapping table
  fs0  : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,SigEA5AA2AA-4522-11                                                                                        E1-8002-D6217B60E588)
  blk0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
  blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)
  blk2 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)
  blk3 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,SigEA5AA2AA-4522-11                                                                                        E1-8002-D6217B60E588)
  blk4 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part2,SigEA5AA2E6-4522-11                                                                                        E1-8003-D6217B60E588)

 

2 REPLIES
binu_mathew
Frequent Advisor

Re: Not able to find DVD mapping in EFI shell

Hi All ,

 

I am not sure what I did exactly , But Now its showing only the cdrom

i issued drvcfg -s  and enabled all primary master , sleve and secondary master and sleve ..and then I stopped the controller . after i issued map -r .. then I could find the cdrom .. but its not showing any disk ..

is this something related to raid controller ?

S_Logan
HPE Pro

Re: Not able to find DVD mapping in EFI shell

Hi Binu,

 

Could you please confirm, what is the release  of the HPUX 11i v3.

Is it a ISO image or HP media

 

Please try to use the latest release of the HPUX11i v3 DVD media from HP.

 

I hope the new media will resolve your issue.

 

HTH
Surendar
How to assign KUDOS! Click the STAR!

HP Guided Troubleshooting - www.hp.com/support/hpgt

 

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!