Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Not able to install OS when fiber cables are connected.....

 
Pulse001
Regular Advisor

Not able to install OS when fiber cables are connected.....

I am trying to install OS on rx2620 server which already has HP-UX 11i v3 on it and when i am booting from DVD, it stops after detecting the install DVD. But if i remove the fiber channel cables i am able to install OS.

I tried many times but was not able to install OS while having the fiber channel cables connected to the server.

Can somebody please explain the reason for this ?
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Not able to install OS when fiber cables are connected.....

I think it will not stop, but the system scans the SAN - this may take a while, be patient.

Why not disconnect the cables while installing?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Pulse001
Regular Advisor

Re: Not able to install OS when fiber cables are connected.....

I tried by removing the FC card and SCSI card i.e i tried by installing in minimum configuration. Then the installation was successful.