OS_MCA problem during boot (Superdome Integrity SX2000)

[guru4hp]

I have a problem with partition 1 on Superdome Integrity SX2000

Error:
SFW 0,4,0 *7 f480009840e00000 000000000000000b MC_INITIATED
01/16/2008 17:01:29
SFW 0,4,0 *3 6b00029040e00000 01000000478e386a MC_PAL_CANT_ESCALATE_TO_BINIT
01/16/2008 17:01:30
SFW 0,4,0 *3 7680010740e00000 0000000000000020 OS_MCA_NOT_REGISTERED
01/16/2008 17:01:30
SFW 0,4,0 *7 e18001fd40e00000 00000903fc8443d0 HALT
01/16/2008 17:01:30
SFW 0,4,0 *7 f48001fd40e00000 00000000000b000c HALT
01/16/2008 17:01:30
SFW 0,4,0 *7 f480009840e00000 000000000000000b MC_INITIATED

01/16/2008 17:17:03
SFW 0,4,0 *3 6b00029040e00000 01000000478e3c11 MC_PAL_CANT_ESCALATE_TO_BINIT
01/16/2008 17:17:05
SFW 0,4,0 *3 7680010740e00000 0000000000000020 OS_MCA_NOT_REGISTERED
01/16/2008 17:17:05
SFW 0,4,0 *7 e18001fd40e00000 00000903fc8443d0 HALT
01/16/2008 17:17:05
SFW 0,4,0 *7 f48001fd40e00000 00000000000b000c HALT
01/16/2008 17:17:05

RTX_BSCS_FO error
==================

EFI version 1.10 [14.61] Running on GenuineIntel Itanium(R) 2 Processor
EFI superdome server SD32B SAL [14:57:14] - HP
Loading 'BRM5701_LAN'...

Copyright (c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v7.0.11

driver: Image BRM5701_LAN loaded at 40FFC46000-40FFC80000. Returned Success
Loading 'FPSWA'...
driver: Image FPSWA loaded at 40FFBDA000-40FFC44000. Returned Success
PciRom S=41 B=00 D=1 F=0 I=0 loaded at 40FFB72000-40FFBD8000
PciRom S=42 B=01 D=4 F=0 I=2 loaded at 40FFB3F000-40FFB72000
PciRom S=42 B=01 D=6 F=0 I=0 loaded at 40FFAF6000-40FFB3E000
MCA event occurred ....

Unable to handoff: OS_MCA handler not registered.

sequencer: The MCA was NOT corrected. A cold boot is required.



# Partition state Activity
- --------------- --------
0 At System Firmware console 149 Logs
1 0 Logs
2 At System Firmware console 70 Logs
3 At System Firmware console 70 Logs
4 At System Firmware console 70 Logs

Partition 1 have only one cell..

Does anybody have some clue ?
TNX.

[Phil uk]

Hi,

I think you will need to post the logs prior to when the MC was initiated.
The logs above tell us that the partition halted, but we need to go further back to establish the events leading up to it halting.

Phil

[guru4hp]

I have find a problem. Because this was a new sd, out of the box, we have change place of 2 combo FC / Nic card, to achieve max performace. We have put them to slots 2 and 9, for max compartibility, but card in slot 2 was not good inserted, and that was a problem with MCA. I have only reinsert card, and everything was ok.