Orca LAN boot

[tommy_28]

Hi,

I found a strange thing in Orca, I wanna boot from LAN and do a net install from A5230A-- PCI 10/100Base-T LAN Adptr, or A6825A--PCI 1000Base-T Gigabit Ethernet Adpt, but it's strange that EFI can't see either of them. I use 'reconnect -r' and 'map -r' and 'devices'/'drvtree' command, I can see the ethernet card, but when I tried 'Add a boot option', there's no option for ethernet MAC.

This is strange , hum?

Do you have any suggestions?

Thx.

[tommy_28]

More informations:
I found auto-negotiation timeout in bootup; 'info boot' cmd in EFI shell can see some ethernet cards, but still can't add boot options in EFI menu.

dec2114x found MAC address 00:30:6e:4a:c4:91 Name = sni0
Timed out waiting for auto-negotiation to complete
Scsi(Pun0,Lun0) HP 73.4GMAS3735NC HPC3 ( 80 MBytes/sec)
Scsi(Pun1,Lun0) HP 73.4GMAS3735NC HPC3 ( 80 MBytes/sec)
Scsi(Pun3,Lun0) HP 73.4GMAS3735NC HPC3 ( 80 MBytes/sec)
Scsi(Pun4,Lun0) HP 36.4GMAS3367NC HPC3 ( 80 MBytes/sec)
Scsi(Pun5,Lun0) HP 36.4GMAS3367NC HPC3 ( 80 MBytes/sec)
Scsi(Pun6,Lun0) HP 36.4GMAS3367NC HPC3 ( 80 MBytes/sec)
Scsi(PunF,Lun0) HP A6491A HP16
Scsi(Pun1,Lun0) HP DVD-ROM 305 1.01 ( 20 MBytes/sec)
Scsi(Pun3,Lun0) HP C5683A C111 ( 40 MBytes/sec)
dec2114x found MAC address 00:30:6e:4a:f4:90 Name = sni1
Timed out waiting for auto-negotiation to complete
dec2114x found MAC address 00:30:6e:4a:e4:c3 Name = sni2
Timed out waiting for auto-negotiation to complete

Shell> info boot

BOOT INFORMATION

Monarch CPU:

Current Preferred
Monarch Monarch Possible Warnings
------- --------- -----------------
0 0

AutoBoot: ON - Timeout is : 10 sec

Boottest:

BOOTTEST Settings Default Variable

OS is not speedy boot aware.

Selftest Setting
--------- --------------
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test

LAN Address Information:

LAN Address Path
----------------- ----------------------------------------
Mac(00306EF3CD2D) Acpi(HWP0002,0)/Pci(3|0)/Mac(00306EF3CD2D))
*Mac(00306EF31D94) Acpi(HWP0002,100)/Pci(2|0)/Mac(00306EF31D94))

[tommy_28]

Hum,

I found when EFI boot up in rx2600/4640, There's a word said 'Broadcom NETextreme EFI Driver 3.07', but in Orca there isn't.

Seem's the EFI system missed Broadcom driver, where can I get it then? I've searched HP, broadcom, even Intel, did not got hints.

Thx.