PA RISC and Intergrity

[bond007]

Hi,

I have seen a specification recently in which PA RISC CPU was mentioned in a Intergrity server, Is that correct ? I had a opinion that only IA CPUs would be there in Integrity Servers.

Thanks and Regards

Bond.

[Arunvijai_4]

Hi Bond,

I dont think PA-RISC in a Integrity server. It is only for Itanium processor family.

Here is the link for Integrity family,

http://www.hp.com/products1/servers/integrity/index.html

-Arun

[Senthil Kumar .A_1]

Hi,

As far I understand , it should be Itanium based.

http://www.hp.com/products1/servers/integrity/index.html

Also, the PA-RISC based systems are given a generic name "HP 9000 servers".

Could you provide us with the link where PS-RISC was specified as a part of integrity server.


Regards,
Senthil Kumar .A

[Sivakumar TS]

Hi,

its not mandatory, even PA 8900 CPUs can be there in integrity servers

Regards,

Siva.

[kris rombauts]

In order to avoid the reference you have seen causes confusion, for those HP servers that can have PA or IA (or both) their is only support for the 4 OS's (HP-UX, Windows, Linux, OPen VMS) on the IA based servers.

i.e. a Superdome can have a mixture of IA and PA CPU based cell boards inside the same chassis but obviously only UX will run on the partitions with the PA cell boards.


Kris

[Sivakumar TS · Accepted solution]

Hi,

Mainly you can clasify rp servers as PA and rx servers as Itanium based servers.

Siva