PCI-X Ultra320 SCSI adapter on rx2620

[Eduardo Andrade]

Hi
How configure this array controler on rx2620 without vga.

Thanks

P.S. This thread has been moved from HP 9000 to Servers > Integrity. -HP Forum Moderator

[Torsten.]

Hi,

look at this document:

http://www.docs.hp.com/en/J6373-90008/ch04s08.html#bejdbdgj

or see
man mptconfig
man mptutil

[Eduardo Andrade]

Thanks
But i need configure boot disks in raid 1 with the controller

[Matti_Kurkela]

The "A7173A PCI-X Ultra320 SCSI adapter" is not a RAID array controller, just a SCSI interface card. It does not have hardware RAID1 functionality.

On HP-UX, the RAID1 mirroring for the system disk is typically done at the software level, using the MirrorDisk optional OS component (not free). The mirroring is done after the OS is installed.

I've understood that it *is* possible to install a hardware RAID card on rx2620, but I have no experience of that.

[Alexander M. Ermes]

Hi there.
If you need a RAID interface, try the 6402 smart array interface. We use this on a RX4640 system with HP-UX 11.23 for Itanium.
Rgds
Alexander Ermes

[Eduardo Andrade]

Hi
Im have a PCI-X Dual Chanel Ultra 320 SCSI hba and install Red Hat Linux Advance server.
I need configure internal disk in mirror

Best Regards

[Torsten.]

If you don't have a hardware RAID card (smartarray), you need to use a volume manager (e.g. LVM) to mirror your disks.