Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

PCI-X Ultra320 SCSI adapter on rx2620

 
Eduardo Andrade
Occasional Advisor

PCI-X Ultra320 SCSI adapter on rx2620

Hi
How configure this array controler on rx2620 without vga.

Thanks

 

P.S. This thread has been moved from HP 9000 to Servers > Integrity. -HP Forum Moderator

6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: PCI-X Ultra320 SCSI adapter on rx2620

Hi,

look at this document:

http://www.docs.hp.com/en/J6373-90008/ch04s08.html#bejdbdgj

or see
man mptconfig
man mptutil

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Eduardo Andrade
Occasional Advisor

Re: PCI-X Ultra320 SCSI adapter on rx2620

Thanks
But i need configure boot disks in raid 1 with the controller
Matti_Kurkela
Honored Contributor

Re: PCI-X Ultra320 SCSI adapter on rx2620

The "A7173A PCI-X Ultra320 SCSI adapter" is not a RAID array controller, just a SCSI interface card. It does not have hardware RAID1 functionality.

On HP-UX, the RAID1 mirroring for the system disk is typically done at the software level, using the MirrorDisk optional OS component (not free). The mirroring is done after the OS is installed.

I've understood that it *is* possible to install a hardware RAID card on rx2620, but I have no experience of that.
MK
Alexander M. Ermes
Honored Contributor

Re: PCI-X Ultra320 SCSI adapter on rx2620

Hi there.
If you need a RAID interface, try the 6402 smart array interface. We use this on a RX4640 system with HP-UX 11.23 for Itanium.
Rgds
Alexander Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"
Eduardo Andrade
Occasional Advisor

Re: PCI-X Ultra320 SCSI adapter on rx2620

Hi
Im have a PCI-X Dual Chanel Ultra 320 SCSI hba and install Red Hat Linux Advance server.
I need configure internal disk in mirror

Best Regards
Torsten.
Acclaimed Contributor

Re: PCI-X Ultra320 SCSI adapter on rx2620

If you don't have a hardware RAID card (smartarray), you need to use a volume manager (e.g. LVM) to mirror your disks.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!