Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

PDT ENTRY FULL RX2660

 
Shattia Moorthi
Frequent Advisor

PDT ENTRY FULL RX2660

dear experts,

Cannot add PDT ENTRY FULL, how to solve this issue?

I'm using rx2600 server, OS HPUX 11.31

thanks in advance
4 REPLIES 4
Anshumali
Esteemed Contributor

Re: PDT ENTRY FULL RX2660

Have a look here. Specially what matti wrote:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1104216

cheers!
Anshu
Dreams are not which you see while sleeping, Dreams are which doesnt allow you to sleep while you are chasing for them!!
kris rombauts
Honored Contributor

Re: PDT ENTRY FULL RX2660

Shatti,

while the PDT table can be cleared, it is best to record the contents before clearing the table and also let HP or your service provider check and replace the eventual bad DIMM(s) to avoid you get system crashes in the future when to many errors on the same DIMM could lead to a unstable system.


HTH

Kris
cnb
Honored Contributor

Re: PDT ENTRY FULL RX2660

Event Number: 325

WBEM Severity: Critical

Event Summary: Cannot add PDT entry-PDT full

Event Description: An attempt was made to add an entry to a full PDT. The entry is not added, and this event is sent.

Hi,

http://docs.hp.com/en/diag/sfm/FPL_IndicationProvider.html


Probable Cause: Unknown

Event Category: Memory

Event Sub-Category: Unknown

Cause 1: An attempt was made to add an entry to a full PDT.

Recommended Action 1: Run the 'pdt' command from the EFI shell and remove/replace the DIMM that has the most PDT entries. If that doesn't work, contact HP support.

Rgds,
Shattia Moorthi
Frequent Advisor

Re: PDT ENTRY FULL RX2660

Thank you experts