Partition0 in the rx8620 complex is not powering up

[Yaboto]

Yes , the problem is with cell 1. When I try to power it on from the PARTMGR GUI, it takes a very long time and never power on.

What should I do now ?

[Yaboto]

Please have a look at this.



Please try again.


MP MAIN MENU:


CO: Consoles

VFP: Virtual Front Panel (partition status)

CM: Command Menu

CL: Console Logs

SL: Show Event Logs

HE: Help

X: Exit Connection


[uninitialized] MP> cm


Enter HE to get a list of available commands




[uninitialized] MP:CM> pe


This command controls power enable to a hardware device.


T - Cabinet

C - Cell

P - IO Chassis

X - Complex

R - Partition

Select Device: c

Enter cell number: 1


The power state is OFF for Cell 1.

In what state do you want the power? (ON/OFF) ON



Cell board power disabled - incompatible processors/cell.


Error attempting to power ON : RtnCodeFailure


[uninitialized] MP:CM>

[uninitialized] MP:CM>

[Torsten.]

"Cell board power disabled - incompatible processors/cell"

I would inspect the CPUs to find out the model and if they are all the same ...

[Yaboto]

Hi Dear helpers,

I finally replaced the problematique cell board with a working one from a stand by complex. Everything is ok now.

Regards,
Berenger