Integrity Servers
1748138 Members
3764 Online
108758 Solutions
New Discussion юеВ

Power Cable for rx3600

 
titi chen
Occasional Contributor

Power Cable for rx3600

Dear All,

Does anyone know whether we can use 2 vast power cable for server rx3600, since its origical power cable has 3 vast and it's a custom, and doesn't match with any adaptor we've got. Appreciate for your quick response.

Thanks.
2 REPLIES 2
Robert-Jan Goossens
Honored Contributor

Re: Power Cable for rx3600

Hi,

Are you referring to One-phase and Three-phase power cables or is your question about the minimum number of power cables for a RX3600?

Regards,
Robert-Jan

Re: Power Cable for rx3600

If you've only ever dealt with smaller x86 systems which almost exclusively use IEC C13/C14 you could be forgiven for thinking the power connectors on a rx3600 are custom, but they're not.

The power connector on the rx6600 power supply is *not* a custom connector, its a standard IEC C20 connection into which you plug an IEC C19 connector. What's on the other end is localized depending on where you are in the world. Here in EMEA the power cables would typically have another C19 connector on the other end which plugs into a C20 connector on a PDU strip in the rack. You may have some different arrangement.

As has already been pointed out, this is ALL siungle phase AC. There's no DC or 3-phase option available.

I suggest you look at the following spreadsheet which might help you identify the cable you require:

http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/hp_power_cord_option_kits_w7_08_updates.xls

HTH

Duncan

I am an HPE Employee
Accept or Kudo