Integrity Servers
1748169 Members
3878 Online
108758 Solutions
New Discussion юеВ

Re: Problem Reseting EFI

 
Tim Gales
New Member

Problem Reseting EFI

I am trying to reset my MP card back to
its default Logins and Passwords.

I powered off the rx1620 and held in the
TOC (reset) button after re-applying power.

Then went to a laptop running a serial
communication program set at 9600 8 bits XON/XOFF.

I tried hitting return a few times and a
CTRL-B before 5 seconds and nothing happens.

It just goes to the menu using the non-default user/password:
MP login: HP Management Processor
Firmware Revision E.03.15 Feb 18 2005,20:09:34
MP login:

On an rx2600 the procedure produced something
like: warning only default users configured --
from which you could start over.

Is there something I am missing or something
else I can try?
6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: Problem Reseting EFI

Have a look at the DC command. There you can reset all user configurations (UC).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Problem Reseting EFI

If you cannot remember your passwords, you should press the MPs reset button and watch the console. The system will ask you if you want to reset the passwords to the default.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Tim Gales
New Member

Re: Problem Reseting EFI

No that's what I am saying:

Holding down the TOC button
with power on and as I apply power
never gives me a chance to reset...
Torsten.
Acclaimed Contributor

Re: Problem Reseting EFI

The TOC (transfer of control) button has *nothing* to do with the MP configuration.

I'm sure the MP reset button is directly on the MP (behind the bezel).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Tim Gales
New Member

Re: Problem Reseting EFI

Yes okay I found it.
It was inside one of the perforation holes
on the back.

Thanks for your help
Tim Gales
New Member

Re: Problem Reseting EFI

.