- Community Home
- >
- Servers and Operating Systems
- >
- Integrity Servers
- >
- Re: Problem with boot from DVD my rx7640
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 07:11 AM
тАО09-11-2008 07:11 AM
Problem with boot from DVD my rx7640
I have new rx7640 and I try boot and install HPUX 11.31 but during boot (EFI)I have mesage
"Selected boot option: Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)]
Loading.: Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)]
Load of Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)] failed: Not Found
Press any key to continue"
What you think about my problem?How can i sove this problem?Please help me.Thanks a lot for help.
Slawek
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 07:20 AM
тАО09-11-2008 07:20 AM
Re: Problem with boot from DVD my rx7640
Do you have the cd in the upper internal drive? Or should it be the lower?
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 07:35 AM
тАО09-11-2008 07:35 AM
Re: Problem with boot from DVD my rx7640
I have in internal drive media DVD (HP Mission Critical 11.31 DVD 1 of 2)
Slawek
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 07:42 AM
тАО09-11-2008 07:42 AM
Re: Problem with boot from DVD my rx7640
Shell> reconnect -r
Shell> map -r
Do you see any fs_: entries, e.g. fs0:> ?
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 07:46 AM
тАО09-11-2008 07:46 AM
Re: Problem with boot from DVD my rx7640
mount /dev/dsk/c5t2d0 /dvdrom
/dev/dsk/c5t2d0: I/O error
Slawek
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 07:47 AM
тАО09-11-2008 07:47 AM
Re: Problem with boot from DVD my rx7640
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 08:01 AM
тАО09-11-2008 08:01 AM
Re: Problem with boot from DVD my rx7640
EFI Boot Manager ver 1.10 [14.61] Loading device drivers
EFI Boot Manager ver 1.10 [14.61] Please select a boot option
OS might use only the primary console set via boot manager or conconfig command
HP-UX Primary Boot: 0/0/0/3/0.0x6.0x0
LAN [Acpi(HWP0002,PNP0A03,101)/Pci(1|0)/Pci(6|0)/Mac(001CC4C5BA2
LAN [Acpi(HWP0002,PNP0A03,101)/Pci(1|0)/Pci(6|1)/Mac(001CC4C5BA2
LAN [Acpi(HWP0002,PNP0A03,102)/Pci(1|0)/Mac(001A4B07FFCE)]
LAN [Acpi(HWP0002,PNP0A03,102)/Pci(1|1)/Mac(001A4B07FFCF)]
LAN [Acpi(HWP0002,PNP0A03,1)/Pci(1|0)/Pci(6|0)/Mac(001CC4C5BA4C)
LAN [Acpi(HWP0002,PNP0A03,1)/Pci(1|0)/Pci(6|1)/Mac(001CC4C5BA4D)
LAN [Acpi(HWP0002,PNP0A03,2)/Pci(1|0)/Mac(001A4B07FDA6)]
LAN [Acpi(HWP0002,PNP0A03,2)/Pci(1|1)/Mac(001A4B07FDA7)]
EFI Shell [Built-in]
Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|
Boot Option Maintenance Menu
Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell
Selected boot option: EFI Shell [Built-in]
Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.61]
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig82DA0F42-2E12-11DD-8000-D6217B60E588)
fs1 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part3,Sig82DA0FA6-2E12-11DD-8000-D6217B60E588)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)
blk1 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig82DA0F42-2E12-11DD-8000-D6217B60E588)
blk2 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part2,Sig82DA0F88-2E12-11DD-8000-D6217B60E588)
blk3 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part3,Sig82DA0FA6-2E12-11DD-8000-D6217B60E588)
blk4 : Acpi(HWP0002,PNP0A03,1)/Pci(1|0)/Pci(4|1)/Scsi(Pun5,Lun0)
blk5 : Acpi(HWP0002,PNP0A03,100)/Pci(3|0)/Scsi(Pun6,Lun0)
blk6 : Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)
blk7 : Acpi(HWP0002,PNP0A03,101)/Pci(1|0)/Pci(4|1)/Scsi(Pun6,Lun0)
startup.nsh> echo -off
setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader
Shell> reconnect -r
Scsi(Pun6,Lun0) HP 300 GST3300655LC HPC8 (320 MBytes/sec)
Scsi(Pun5,Lun0) HP 300 GST3300655LC HPC8 (320 MBytes/sec)
PciRom S=00 B=70 D=1 F=0 I=3 loaded at 787FBABD000-787FBAF0000
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
Scsi(Pun6,Lun0) HP 300 GST3300655LC HPC8 (320 MBytes/sec)
Scsi(Pun2,Lun0) Optiarc DVD RW AD-5170A 1.32 ( 40 MBytes/sec)
Scsi(Pun6,Lun0) HP 300 GHUS153030VL3800 HPC1 (320 MBytes/sec)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
PciRom S=01 B=8D D=4 F=0 I=0 loaded at 787FBA93000-787FBABD000
PciRom S=01 B=8D D=6 F=0 I=0 loaded at 40FFC3C000-40FFC76000
Copyright (c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v7.0.11
HP 2Port 2Gb Fibre Channel Adapter (driver 1.47, firmware 3.03.154)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
ReconnectController(0,0,0) : Status = Success
Shell>
Shell> map -r
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig82DA0F42-2E12-11DD-8000-D6217B60E588)
fs1 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part3,Sig82DA0FA6-2E12-11DD-8000-D6217B60E588)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)
blk1 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig82DA0F42-2E12-11DD-8000-D6217B60E588)
blk2 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part2,Sig82DA0F88-2E12-11DD-8000-D6217B60E588)
blk3 : Acpi(HWP0002,PNP0A03,0)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part3,Sig82DA0FA6-2E12-11DD-8000-D6217B60E588)
blk4 : Acpi(HWP0002,PNP0A03,1)/Pci(1|0)/Pci(4|1)/Scsi(Pun5,Lun0)
blk5 : Acpi(HWP0002,PNP0A03,100)/Pci(3|0)/Scsi(Pun6,Lun0)
blk6 : Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)
blk7 : Acpi(HWP0002,PNP0A03,101)/Pci(1|0)/Pci(4|1)/Scsi(Pun6,Lun0)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 08:09 AM
тАО09-11-2008 08:09 AM
Re: Problem with boot from DVD my rx7640
EFI Shell [Built-in]
Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|
Boot Option Maintenance Menu
Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell
Selected boot option: Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)]
Loading.: Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)]
Load of Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(3|1)/Scsi(Pun2,Lun0)] failed: Not Found
Press any key to continue
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 08:11 AM
тАО09-11-2008 08:11 AM
Re: Problem with boot from DVD my rx7640
Scsi(Pun6,Lun0) HP 300 GST3300655LC HPC8 (320 MBytes/sec)
Scsi(Pun2,Lun0) Optiarc DVD RW AD-5170A 1.32 ( 40 MBytes/sec)
Scsi(Pun6,Lun0) HP 300 GHUS153030VL3800 HPC1 (320 MBytes/sec)
this is
disk
dvd drive
disk
but the system cannot read the media. Can you try another bootable (for Integrity) media?
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-11-2008 08:19 AM
тАО09-11-2008 08:19 AM
Re: Problem with boot from DVD my rx7640
Slawek