Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with rx4640

 
Michael Stebich
Occasional Contributor

Problem with rx4640

Hi, I received a rx4640 back from a customer. The mashine is running but is not booting into the OS. But there are some error messages in the Event Log.

1.
Log Entry xxx: date xxx
Alert Level 3: Warning
Keyword: IO_CHECK_LBA_DECONFIG_ERR
I/O host bridge is deconfigured
logged by system Firmware 0
...
...

2.
..
..
keyword: IO_DLL_ERROR
PCI clock DLL error
logged by system firmware 0
..
..

3.
..
..
keyword: Type-02 0f7000 1011712
System firmware error
logged by: Redundant w/ an E0 code;
..
..

4.
..
..
keyword: BOOT_UNEXPECTED_TRAP_POST_REDIR_TABLE
Unexpected trap
logged by: system firmware

5.
..
..
keyword: BOOT_IVT_OFFSET
trap taken
logged by: system firmware 0
..
..

Thanks in advance
Michael
1 REPLY 1
Michael Stebich
Occasional Contributor

Re: Problem with rx4640

Found it.

That machine has an I/O error. One of the PCI Slots wasn't flashing. The machine was booting fine but the problem caused that there was no signal on the vga. After changing the chassis (with board) the machine worked fine.