Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID Controller support

 
sridharan_p
Occasional Contributor

RAID Controller support

We are having a RAID Controller with Service Part No. 435709-001, can i implement RAID 5 on rx2660 with this controller on rx2660 running on HP Ux

 

regards

Sridharan.

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: RAID Controller support

This controller can only create 2 pairs of mirrored disks, for RAID 5 you need the optional P400 smartarray controller.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
S_Logan
HPE Pro

Re: RAID Controller support

Hi Sridhar,

 

If you are using P400/P600/P800 Card ,  RAID 5 Is supported.

 

 

Fault Management
P400 supported RAID configurations:
                      -  RAID 6 (Advanced Data Guarding)**
                      -  RAID 5 (distributed Data Guarding)
                      -  RAID 1+0 (Striping & Mirroring)
                      -  RAID 1 (Mirroring)
                      -  RAID 0 (Striping)

P600 supported RAID configurations:
                      -  RAID 6 (Advanced Data Guarding)
                      -  RAID 5 (distributed Data Guarding)
                      -  RAID 1+0 (Striping & Mirroring)
                      -  RAID 0 (Striping)

P800 supported RAID configurations:
                      -  RAID 6 (Advanced Data Guarding)
                      -  RAID 5 (Distributed Data Guarding)
                      -  RAID 1+0 (Striping & Mirroring)

 

----------------------------------------------------

 

If you are using 347786-B21- HP 64/133 2-ports Int PCI-X SAS Host Bus Adapter,

Fault Tolerance: Keeps data available and server running while a failed drive is being replaced


Drive Mirroring (RAID 1): This allocates half of the drive array to data and the other half to mirrored data, providing two copies of every file.

 

HTH,

Surendar

Was the post useful? Click on the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/

 

I work for HPE

Accept or Kudo