cancel
Showing results for 
Search instead for 
Did you mean: 

RAID1 configure

 
SOLVED
Go to solution
SamirShrestha
Frequent Advisor

RAID1 configure

I've newly purchased HP RX3600 with built-in SAS3080X-HP sas controller card. I've connected two sas hard in slot 1&2. as per specification SAS3080X-HP support RAID level1 and I want to configure in same raid. How to configure raid1 ?
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: RAID1 configure

You should get the guide

HP 8 Internal Port SAS Host Bus Adapter
(SAS Controller) Users Guide

from web (google it) - it has the detailed steps.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor
Solution

Re: RAID1 configure

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02017117/c02017117.pdf


page 32



Hard to find on BSC :-((

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
SamirShrestha
Frequent Advisor

Re: RAID1 configure

thanks