Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

ROM revision not equal to Rev block

 
Raj Khedan
Occasional Contributor

ROM revision not equal to Rev block

I cant figure out the problem...help please. please find attached file

5 REPLIES 5
Dennis Handly
Acclaimed Contributor

Re: ROM revision not equal to Rev block

(It would be helpful if you included your server type rx6600 in your message too.)
Torsten.
Acclaimed Contributor

Re: ROM revision not equal to Rev block

It's a ia64 hp server rx6600, please run from MP

MP:CM> sysrev

and send.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Raj Khedan
Occasional Contributor

Re: ROM revision not equal to Rev block

thank you for replying. Well the servers work as cluster. I have 2 servers on which i ran the command cm>sysrev. The results are shown as below:
Server1:

MP FW :F.01.58
BMC FW: 05.14
EFI FW: ROM A 07.14, ROM B 07.14
SYSTEM FW: ROM A 04.11,R0M B 04.11 BOOT ROM A
PDH FW: 50.07
DHPC FW: 01.23
VCIO FW: 03.0a
PRS FW: 00.08 UPSEQREV:OC, DOWNSEQREV: 08
HFC FW:00.04 SETREV:00

server2:

MP FW :F.02.23
BMC FW: 05.25
EFI FW: ROM A 07.14, ROM B 07.14
SYSTEM FW: ROM A 04.11,R0M B 04.11,BOOT ROM A
PDH FW: 50.07
DHPC FW: 01.23
VCIO FW: 03.0b
PRS FW: 00.08 UPSEQREV:OC, DOWNSEQREV: 08
HFC FW:00.03 SETREV:00




Torsten.
Acclaimed Contributor

Re: ROM revision not equal to Rev block

Both servers have old firmware, the first has a mismatch between 2 versions.

Current is

PF_CRUSASYS0415EFI.tar.gz ((27 Jul 2010)
========================================

MP FW : F.02.25
BMC FW : 05.26
EFI FW : ROM A 07.14, ROM B 07.14
System FW : ROM A 04.15, ROM B 04.15, Boot ROM A
PDH FW : 50.07
DHPC FW : 01.23
UCIO FW : 03.0b
PRS FW : 00.08 UpSeqRev: 0c, DownSeqRev: 08
HFC FW : 00.04 SetRev: 00





Update both!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: ROM revision not equal to Rev block

Some explanation:

different parts of the firmware are located on different boards inside the system, if you replace a board now (e.g. the PCI or MP board) without checking/updating firmware, you may get such a mismatch.

This may result even in an unbootable system.

As said, get the firmware from web (EFI or ISO file), follow the instructions and update.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!