cancel
Showing results for 
Search instead for 
Did you mean: 

RX 2600

 
Sachin Palav
Occasional Visitor

RX 2600

I am Installing SUSE 8.0 in RX2600 server. When I boot the server from HP linux Enablement Kit after selecting "Install Linux from Distribution" it come to "loading initrd.. done" and does not do anything

I am using serial console.
Please suggest me what should I do ..
Also please tell me how to enable VGA(local) on this server ..

Thank
Sachin Palav
3 REPLIES 3
Highlighted
Ted Buis
Honored Contributor

Re: RX 2600

I have only loaded RH, so can't help except that the VGA path can be selected in the from the boot management (maintenance?) options.
Mom 6
Prashant (I am Back)
Honored Contributor

Re: RX 2600

Hi Sachin,

SUSE RX26000 is not supported.

These are the following options to proceed ( for output from consol to vga :

Connect using the MP Port. Then go to live consol then Boot option then select the consol output option. select the last on there. It will do with the same.

Regards,
Prashant S.
Nothing is impossible
Robert Daly_2
Occasional Advisor

Re: RX 2600

Sachin, SuSE SLES 8 is indeed supported on the rx2600 as you can see on the certification page: http://h10018.www1.hp.com/wwsolutions/linux/products/servers/itanium-cert-matrix.html

What may be of use is the Installing Linux Guide, which appears to include instructions on how to configure the console or revert to VGA: http://h200007.www2.hp.com/bc/docs/support/SupportManual/c00099083/c00099083.pdf
"Global Focus" is an Oxymoron