Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX2600 Boot msg: fw_psm_init: EFI_SetVariable failed

 
Norman Dignard
Regular Advisor

RX2600 Boot msg: fw_psm_init: EFI_SetVariable failed

I noted this in the syslog on the box.
Mar 6 07:36:20 nesaweb syslogd: restart
Mar 6 07:36:20 nesaweb vmunix:
Mar 6 07:36:20 nesaweb vmunix: MFS is defined: base= 0xe000000101a53000 size= 27988 KB
Mar 6 07:36:20 nesaweb vmunix: Found adjacent data tr. Growing size. 0x25ad000 -> 0x65ad000.
Mar 6 07:36:20 nesaweb vmunix: Loaded ACPI revision 2.0 tables.
Mar 6 07:36:20 nesaweb vmunix: fw_psm_init: EFI_SetVariable failed, retval [0x8000000000000007]
Mar 6 07:36:20 nesaweb vmunix: MMIO on this platform supports Write Coalescing.
Mar 6 07:36:20 nesaweb vmunix:
Mar 6 07:36:20 nesaweb vmunix: MCA recovery subsystem disabled, not supported on this platform.
Mar 6 07:36:20 nesaweb vmunix: Using /stand/ext_ioconfig
Mar 6 07:36:20 nesaweb vmunix: Memory Class Setup



Can some educate me on what the error is and how to address it?
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: RX2600 Boot msg: fw_psm_init: EFI_SetVariable failed

I would first check for firmware, then for patches.

FW is

System FW : 02.31
BMC FW : 01.53
iLO MP FW : E.03.32

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=447335&swItem=ux-67850-1&prodNameId=88839&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=0

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Norman Dignard
Regular Advisor

Re: RX2600 Boot msg: fw_psm_init: EFI_SetVariable failed

I'm at
System Firmware 4.29
BMC: 4.04
EFI: 5.48
MP: E.03.32
Torsten.
Acclaimed Contributor

Re: RX2600 Boot msg: fw_psm_init: EFI_SetVariable failed

So I doubt it is a rx2600 - maybe a rx2620?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Norman Dignard
Regular Advisor

Re: RX2600 Boot msg: fw_psm_init: EFI_SetVariable failed

Sorry its a rx2620