Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX2600 Bott Problem

 
SOLVED
Go to solution
MALIK ADEEL IMTIAZ
Frequent Advisor

RX2600 Bott Problem

Dear Torsten,
I have done all these steps which you mentioned (reconnect -r) and (map - r) and (devices).
But poroblem is still there.
Let me explain you in detail.
after restart (with windows 2003 itanium cd)the machine it comes to these options after restart.
Please select a boot option.
1)EFI Shell [Built-in]
2)Boot option Maintenance Menu
3)System Configuration Menu.
i select option 1 and it comes to Shell> prompt here i type reconnct -r and press enter after some time it shows me "Reconnect Controller(0,0,0):Status=Sccessful"
i type fs0: and then cd EFI then type SETUPLDR (which is setup command of Windows 2003 O/S)
Here Torsten one thing i cant understand and that is when i restart the machine i cant find CDROM option in (Please Select a boot option) why i am running windows server 2003 setup manuly from fs0 and efi and then SETUPLDR. i am unable to see CDROM option in start.

Your early responce will be highly appricable..

Thanks
ADeel Imtiaz
adeel.imtiaz@netsolpk.com
Netsoltechnologies
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: RX2600 Bott Problem

If you want to have a boot option for the CD drive, you need to add it - it's not there by default.

Select
-> Boot Option Maintenance Menu
-> Add a Boot Option

select

Removable Media Boot [Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master

(this is the CD-ROM on my rx2600 - you'll see the removable media)

-> [Treat like Removable Media Boot]

-> Enter New Description:

< put something in >

-> Enter BootOption Data Type [A-Ascii U-Unicode N-No BootOption] :



-> Enter BootOption Data [Data will be stored as Unicode string]:



Save changes to NVRAM [Y-Yes N-No]:

"Y"

... and you are done.




Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Bott Problem

Dear Torsten,
First off all accept my applogy for late reply.
Thank you so much for your quick reply and action and solution. Problem has been resolved by doing exect steps you told .

thanks you so much.
I have another problem with another rx2600 server should i make new thread for that.

Thanks
Adeel Imtiaz
Netsol technologies.
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Bott Problem

Dear Torsten,

Thank you so much for your quick reply, action and solution.

Thanks
Adeel Imtiaz
Netsol technologies.