Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX2600 Has no Display

 
SOLVED
Go to solution
MALIK ADEEL IMTIAZ
Frequent Advisor

RX2600 Has no Display

Dear Torsten,

I have HP Server rx2600 when i push the start button it starts with red light then it converts in to orange after 3 to 4 minutes it again converts in to red light. And has no DISPLAY at all.

A time ago i had called a HP vendor he updates its BIO's i THINK problem starts from there.
Do you have any idea?

Thanks
Adeel Imtiaz
Netsol technologies.
67 REPLIES 67
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Hi Imtiaz Salaam

You have to cal HP Hardware Support for this
but you can check rx2600 is coming with two VGA Adapters also (One Onboard and one add on ).Check with other one.

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Torsten.
Acclaimed Contributor
Solution

Re: RX2600 Has no Display

The reason for this may be logged in the MP logs. Have a look, post them here or call HP support.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear Torsten,
Problem is there is no display at all.

I have pressed the button of MP which is located behind the server but no moment at all.

Is there any jumper sitting's or any thing i can do to reset to get display i think HP person updates its Bios after that display went off. :(

Is there any way to get logs files.

Regards
Adeel Imtiaz
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear Sanjeev,

There is only on VGA which is behind the server.

i Have not found another one. :p

Thanks
ADeel Imtiaz
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Dear Imtiaz Bhai

Que: Is there any way to get logs files.

If you know the IP Address of MP telnet to IP
from PC or connect Serial Port of laptop to MP and than check.

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear Sanjeev,

Thank you so much for you reply, actually red light is blinking continously and secondly i have connected to the console cable but it is not connecting means lan connection is not working.

thanks
Adeel Imtiaz
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Bhai Jaan

I mean to say Connect to Mp ( Serial Port )
with Laptop and than check did you get MP Prompt

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

You should see all the output until the OS is starting to boot on all console connections (the "normal" serial port, the MP console port, VGA).

Once the system is booting, output will *only* go to the default console.

Did you try to connect a VGA monitor already?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Sir Jee,

Yahooo at last i have found the log which is attached.


Thanks
Adeel Imtiaz
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear All,

Above file out put has been generated from CONSOLE/REMOTE/UPS port.

Thanks
Adeel Imtiaz

Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Hi Imtiaz

Good, Mean time i will look into logs but how you got logs :-)

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

The logs you pasted is of 1st jan 1998

Check Events and Console Logs for error messages.


Loca-| | | |
tion |Alert| Encoded Field | Data Field | Keyword / Timestamp
---------------------------------------------------------------
SFW 1 2 0x5680006301E05AA5 0000000000000000 BOOT_START
01 Jan 1998 20:38:50
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Sanjeev,

We have guru here name Jawwad :) he said get some CONSOLE/REMOTE/UPS port so i get it connect it through laptop terminal connection ...:) and get these output.


Thanks
Adeel Imtiaz
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

It Looks Like you have connected to MP through Console/Serial.

That's what i told you.

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Bhai Jaan

Same thing i told you before get some CONSOLE/REMOTE/Serial port.
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

The sent document is recent one.
As this machine was remained off for long time therefore lost its clock setting and need to be resetted but no video.
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

we are only able to connect through Console cabe as o ip address known to us at all.
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Hi Imtiaz Bhai

It looks like there is some problem in PCI Cards Like HBA/Lan or any other IO Card

if you can open this box remove and insert addon cards
The problem is with Add on Cards Only

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Bhai Jaan

You are right, If you will see my Answer above posted same thing i told to you. Serial is Console only.

Sharma Sanjeev Jul 22, 2008 05:48:49 GMT Unassigned

--------------------------------------------------------------------------------
Bhai Jaan

I mean to say Connect to Mp ( Serial Port )
with Laptop and than check did you get MP Prompt

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
YAQUB_1
Respected Contributor

Re: RX2600 Has no Display

Hi Imtiaz,

Ur system must have some panic that's why system showing RED led, RED led means Alert level 5 or above.

If U did not access MP/LAN then U should immediately shutdown (manual power off) Ur system then after 10 to 15 mints later U power on Ur system then try to connect MP/LAN Ur system. Then put MP event log.

BR/
Yaqub
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear All,

Pictures are attached for referance.

Okay when i connect to MP it gives me nothing on terminal on default Hyper Terminal port (9600).

thanks
Adeel Imtiaz
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

Well, this is a wrong cable!

The correct cable is called "M" or "W" cable - 1 24 pin connector and 3 9 pin connectors.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Agree with you Dear Mr. Torsten
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

You need a A6144-63001 - Management processor M-cable

Do a picture search on google for "A6144-63001" so see it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!