Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX2600 Has no Display

 
SOLVED
Go to solution
YAQUB_1
Respected Contributor

Re: RX2600 Has no Display

Hi Imtiaz,

Ur system must have some panic that's why system showing RED led, RED led means Alert level 5 or above.

If U did not access MP/LAN then U should immediately shutdown (manual power off) Ur system then after 10 to 15 mints later U power on Ur system then try to connect MP/LAN Ur system. Then put MP event log.

BR/
Yaqub
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear All,

Pictures are attached for referance.

Okay when i connect to MP it gives me nothing on terminal on default Hyper Terminal port (9600).

thanks
Adeel Imtiaz
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

Well, this is a wrong cable!

The correct cable is called "M" or "W" cable - 1 24 pin connector and 3 9 pin connectors.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Agree with you Dear Mr. Torsten
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

You need a A6144-63001 - Management processor M-cable

Do a picture search on google for "A6144-63001" so see it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear All

what is the defauly login and Password of MP.
it appears after pressing Ctl + B but dont have logi and password.

Thanks
Adeel Imtiaz
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

Admin/Admin for Administrator access
Oper/Oper for Operator access

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear Sir,
Both logins and passwords are not working.

thanks
Adeel Imtiaz
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

The login is useless if you cannot get a login prompt.


If you are still using the wrong cable you need to get the correct cable first!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Kindly look at the file which is attached.

specially at the END OF THE FILE.
I got login prompt for MP.

Regards
Adeel Imtiaz