Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX2600 Has no Display

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

If the problem

"RX2600 Has no Display"

is now solved (I think so), you may consider to close this thread.

If needed, open a new thread about the firmware update.

Otherwise this thread is getting confusing because of the lengths...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear Torsten,

I get display only through HYPER TERMINAL not from normal boot. If you want me to close this threat i am closing it.

Thanks
Adeel Imtiaz
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

What is "normal boot"? VGA?

If you want, you need to configure the console settings from the EFI settings menu.

Regarding the firmware - this may be helpful (scroll down to the firmware part):

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1028277

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

Adjust console settings:

http://docs.hp.com/en/5992-1978/ch04s01.html#cihgcffj

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: RX2600 Has no Display

Hi Malik,

You can get the display from console but your OS failed to boot up possibly due to the SFW issue as it's too old for the server. You only be able to see the output from CO through the MP console unless your server is bootable. Your current bootup failed at SFW level, not yet to the OS level thus you wont see anything, only the MP menu. Lets try to update the firmware or get the system board replaced
MALIK ADEEL IMTIAZ
Frequent Advisor

Re: RX2600 Has no Display

Dear All

Thank you so very much for your quick support and replies. I have no words to thank you all of you for your very kind support specially Sanjeev and Torsten and all.
I will contact local HP vendor for help.

Regards
Adeel Imtiaz
Netsol Technologies
Lahore Pakistan
adeel.imtiaz@netsolpk.com

Torsten.
Acclaimed Contributor

Re: RX2600 Has no Display

You are welcome!

Good luck and have fun!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sharma Sanjeev
Respected Contributor

Re: RX2600 Has no Display

Thanks IMTIAZ and you are welcome any time

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE