RX2620 access MP via Serial Console?

[boje]

Hi!

I am trying to access the MP via Serial cable. But when i connect with Putty i can login as root, and root password. I should then use Ctrl+B to get the menu. But i only get the character ^B. Can someone help me?

Br
Patrik

[Torsten.]

You are using the console port on the black 1-to-3 cable?

[boje]

No, i am using a HP serial cable to te serial port A. It is marked as "Console".
I do not have any management card in my machine. Unfortunately.

Br
Patrik

[Torsten.]

This was my guess ... the management card is what? The MP!

Without MP no MP access ...

[Torsten.]

This was my guess ... the management card is what? The MP!

Without MP no MP access ...

[boje]

Hi Torsten!

Im sorry, i do not know what i am looking for. What is it called the menu you can access and check hardware and such things? No management card no MP menu with CM menu?
The reason is that i need to check my power supplies. I am getting these messages by email about "Power redundancy lost". And i searched this forum for help, found some threads and is now trying to get some status from power supplies. The both LED´s on the power supplies is GREEN. And i have checked the cables. Both cables have power.

This is the message:
>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Tue Aug 5 14:42:41 2008

scar sent Event Monitor notification information:

/system/events/ia64_corehw/core_hw is >= 3.
Its current value is CRITICAL(5).



Event data from monitor:

Event Time..........: Tue Aug 5 14:42:41 2008
Severity............: CRITICAL
Monitor.............: ia64_corehw
Event #.............: 104011
System..............: scar

Summary:
Power Unit : Redundancy lost or not present.


Description of Error:

The number of Power supplies has gone from N+1 (redundant) to N
(non-redundant) if a Power supply was removed, or the number of Power
supplies is < N+1.

Probable Cause / Recommended Action:

The minimum number of power supplies required to power the unit is
currently installed and operating. There are no redundant I/O power
supplies available in case of failure. If redundancy is desired another
Power supply should be added.

For information on the sensor that generated this event, refer to FRU ID
in Event Details section.

Additional Event Data:
System IP Address...: 10.10.10.10
Event Id............: 0x48984ac100000004
Monitor Version.....: B.01.00
Event Class.........: System
Client Configuration File...........:
/var/stm/config/tools/monitor/default_ia64_corehw.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: ia64 hp server rx2620
EMS Version.....................: A.04.20
STM Version.....................: C.56.00
System Serial Number............: SERIAL
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/ia64_corehw.htm#104011

v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v


Event Details :

Event Date .............: Tue Aug 5 14:42:20 2008
Sensor Number ..........: 0x4f
Sensor Type ............: Power Unit
Sensor Class ...........: Discrete (type 0Bh)
Sensor Reading/Offset...: 0x01 (Offset)
Event Type.............: Assertion
Entity ID ..............: 19
Generic Message.........:
Power Unit : Redundancy lost
Entity FRU Id Info......:
power unit / power domain (Sensor ID: Power Redundancy)



>---------- End Event Monitoring Service Event Notification ----------<

Br
Patrik

[Torsten. · Accepted solution]

The problem is, the MP was only optional for tis server.

Let's try something different - from hp-ux run

# echo "sel dev all;info;wait;il"|cstm

and post the result.

[boje]

Hi!

Yes, i did not buy this server, but it was stupid to not buy management card. I think its a must have. Anyway, here is the results:

root@scar:/root: echo "sel dev all;info;wait;il"|cstm
Running Command File (/usr/sbin/stm/ui/config/.stmrc).

-- Information --
Support Tools Manager


Version C.56.00

Product Number B4708AA

(C) Copyright Hewlett Packard Co. 1995-2007
All Rights Reserved

Use of this program is subject to the licensing restrictions described
in "Help-->On Version". HP shall not be liable for any damages resulting
from misuse or unauthorized use of this program.

cstm>sel dev all;info;wait;il
-- Updating Map --
Updating Map...
-- Converting multiple raw log files to text. --
Preparing the Information Tool Log for each selected device...

.... scar : 10.10.10.10 ....

-- Information Tool Log for system on path system --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: system


Product ID : ia64 hp server rx2620
Current Product Number : AB332AR
Original Product Number : N/A
System Firmware Revision : 03.17
BMC Revision : v03.48
System Serial Number: : SERIAL

System Software ID : ID



For additional information about the system and the CPUs, please run the
following command:

/usr/contrib/bin/machinfo



Field Replaceable Unit Identification (FRUID):

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for IPF_MEMORY on path memory --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: memory


Basic Memory Description

Module Type: MEMORY
Page Size: 4096 Bytes
Total Physical Memory: N/A
Total Configured Memory: 24576 MB
Total Deconfigured Memory: N/A

Memory Board Inventory

DIMM Location Size(MB) DIMM Location Size(MB)
-------------------- -------- -------------------- --------
DIMM 0A 2048 DIMM 0B 2048
DIMM 1A 2048 DIMM 1B 2048
DIMM 2A 2048 DIMM 2B 2048
DIMM 3A 2048 DIMM 3B 2048
DIMM 4A 2048 DIMM 4B 2048
DIMM 5A 2048 DIMM 5B 2048

Total: 24576 (MB)

===========================================================================

Memory Error Log Summary

DIMM Location Error Address Error Type Page Count
---------------------- ---------------- ---------- ------------- -----
DIMM 2B 0x40d0305a80 Single-Bit 0x40d0305 1
DIMM 2B 0x4060d29480 Single-Bit 0x4060d29 1
DIMM 2B 0x406017d980 Single-Bit 0x406017d 1
DIMM 2B 0x3d0bfbb00 Single-Bit 0x3d0bfb 1
DIMM 2B 0x391b3f680 Single-Bit 0x391b3f 1
DIMM 2B 0x374d7e900 Single-Bit 0x374d7e 1
DIMM 2B 0x368734980 Single-Bit 0x368734 1
DIMM 2B 0x302fe6380 Single-Bit 0x302fe6 1
DIMM 2B 0x240924000 Single-Bit 0x240924 1
DIMM 2B 0x220351b80 Single-Bit 0x220351 1
DIMM 2B 0x20ff2c180 Single-Bit 0x20ff2c 1
DIMM 2B 0x10df7e200 Single-Bit 0x10df7e 1
DIMM 2B 0x107b7c380 Single-Bit 0x107b7c 1
DIMM 2B 0x537f200 Single-Bit 0x537f 1
DIMM 2B 0x4932000 Single-Bit 0x4932 1
DIMM 2B 0x4767880 Single-Bit 0x4767 1
DIMM 2B 0x4762d00 Single-Bit 0x4762 1
DIMM 2B 0x15099f980 Single-Bit 0x15099f 2

System start: Fri Aug 1 08:04:03 2008.
Last error detected: Fri Aug 1 08:04:03 2008.
Logging interval: 900 seconds.
18 address(es) with errors logged in memory error log.

The Logtool Utility provides full details about the memory error log.

Page Deallocation Table (PDT)

DIMM Location Error Address Error Type Page
---------------------- ---------------- ---------- -------------
DIMM 2B 0x15099f980 Single-Bit 0x15099f

PDT Entries Used: 1
PDT Entries Free: 99
PDT Total Size: 100


=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for Bus Adapter on path 0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0


Product ID: Bus Adapter
Hardware Path: 0
PCI Vendor ID: 0x103c
PCI Device ID: 0x1229

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI Bus Adapter on path 0/0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/0


Product ID: PCI Bus Adapter
Hardware Path: 0/0
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for IDE Bus Adapter on path 0/0/2/0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/0/2/0


Product ID: IDE Bus Adapter
Hardware Path: 0/0/2/0
PCI Vendor ID: 0x1095
PCI Device ID: 0x649

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for IDE Interface on path 0/0/2/0.0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/0/2/0.0


Product ID: IDE Interface
Hardware Path: 0/0/2/0.0
PCI Vendor ID: 0x1095
PCI Device ID: 0x649

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for Optical Storage Device on path 0/0/2/0.0.0.0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/0/2/0.0.0.0


Product Id: DV-28E-B Vendor: TEAC
Device Type: Optical Storage Device Firmware Rev: 2.2B
Device Qualifier: TEACDV-28E-B Logical Unit: 0
Serial Number: N/A
Capacity (M Byte): 4170.85
Block Size: 2048
Max Block Address: 2135476
Error Logs
Read Errors: N/A Buffer Overruns: N/A
Read Reverse Errors: N/A Buffer Underruns: N/A
Write Errors: N/A Non-Medium Errors: N/A
Verify Errors: N/A

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for IDE Interface on path 0/0/2/0.1 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/0/2/0.1


Product ID: IDE Interface
Hardware Path: 0/0/2/0.1
PCI Vendor ID: 0x1095
PCI Device ID: 0x649

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI Bus Adapter on path 0/1 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/1


Product ID: PCI Bus Adapter
Hardware Path: 0/1
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for MPT SCSI Adapter on path 0/1/1/0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/1/1/0


Device File : /dev/mpt2
Device ID : 0x0030
Vendor ID : 0x1000
PCI Revision ID : 8
Subsystem ID : 0x1324
Subsystem Vendor ID : 0x103c
Firmware Version : 01.03.35.65 IO
Firmware Image Size : 39968 bytes
SCSI Initiator ID : 7
PCI Configuration Space Registers
Status = 0x0230 Command = 0x0157
Class Code = 0x10000 (SCSI Controller)
Cache Line Size = 0x20
Latency Timer = 0x40
Expansion ROM Address = 0x90100000


=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for SCSI Disk on path 0/1/1/0.0.0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/1/1/0.0.0


Product Id: MAX3073NC Vendor: HP 73.4G
Device Type: SCSI Disk Firmware Rev: HPC1
Device Qualifier: HP73.4GMAX3073NC Logical Unit: 0
Serial Number: X1016219 0615
Capacity (M Byte): 70007.20
Block Size: 512
Max Block Address: 143374737
Smart Enabled: TRUE
Error Logs
Read Errors: 0 Buffer Overruns: N/A
Read Reverse Errors: N/A Buffer Underruns: N/A
Write Errors: 0 Non-Medium Errors: 52
Verify Errors: 0

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for SCSI Disk on path 0/1/1/0.1.0 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/1/1/0.1.0


Product Id: MAX3073NC Vendor: HP 73.4G
Device Type: SCSI Disk Firmware Rev: HPC1
Device Qualifier: HP73.4GMAX3073NC Logical Unit: 0
Serial Number: X1016570 0615
Capacity (M Byte): 70007.20
Block Size: 512
Max Block Address: 143374737
Smart Enabled: TRUE
Error Logs
Read Errors: 0 Buffer Overruns: N/A
Read Reverse Errors: N/A Buffer Underruns: N/A
Write Errors: 0 Non-Medium Errors: 52
Verify Errors: 0

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for MPT SCSI Adapter on path 0/1/1/1 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/1/1/1


Device File : /dev/mpt3
Device ID : 0x0030
Vendor ID : 0x1000
PCI Revision ID : 8
Subsystem ID : 0x1324
Subsystem Vendor ID : 0x103c
Firmware Version : 01.03.35.65 IO
Firmware Image Size : 39968 bytes
SCSI Initiator ID : 7
PCI Configuration Space Registers
Status = 0x0230 Command = 0x0157
Class Code = 0x10000 (SCSI Controller)
Cache Line Size = 0x20
Latency Timer = 0x40
Expansion ROM Address = 0x90000000


=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI 1000Base-T LAN Adapter on path 0/1/2/0 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/1/2/0


Product ID: HP PCI-X 1000Base-T Dual-port Built-in
Device ID: 0x1079
Revision ID: 0x0003
Vendor ID: 0x8086 ( Intel Corporation )
Class Code: 0x020000 (Reserved)
Base Class: 0x0002 ( Network Controller )
Sub-Class/Interface: 0x00/0x00 ( Ethernet )
Device Status: 0x0230
Bit 5: 66 MHz Capable
Bit 9-10: DEVSEL timing 01 - medium
Subsystem Vendor ID: 0x103c
Subsystem ID: 0x12cd

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI 1000Base-T LAN Adapter on path 0/1/2/1 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/1/2/1


Product ID: HP PCI-X 1000Base-T Dual-port Built-in
Device ID: 0x1079
Revision ID: 0x0003
Vendor ID: 0x8086 ( Intel Corporation )
Class Code: 0x020000 (Reserved)
Base Class: 0x0002 ( Network Controller )
Sub-Class/Interface: 0x00/0x00 ( Ethernet )
Device Status: 0x0230
Bit 5: 66 MHz Capable
Bit 9-10: DEVSEL timing 01 - medium
Subsystem Vendor ID: 0x103c
Subsystem ID: 0x12cd

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI Bus Adapter on path 0/2 --

Log creation time: Tue Aug 5 16:56:13 2008

Hardware path: 0/2


Product ID: PCI Bus Adapter
Hardware Path: 0/2
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for Fibre Channel Interface on path 0/2/1/0 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/2/1/0


Product ID: Fibre Channel Interface
Hardware Path: 0/2/1/0
Module Type: Bus Adapter
Vendor ID: 0x103c
PCI Device ID: 0x1029
PCI Subsystem Vendor ID: 0x103c
PCI Subsystem ID: 0x128c
Topology: Direct Fabric Attach (N_Port to F_Port)
Channel N_PORT_ID: 0x10900
N_Port Port World Wide Name: 50060B00001160BE
N_Port Node World Wide Name: 50060B00001160BF
Tachyon TL/TS Major Revision:2
Tachyon TL/TS Minor Revision:3
Memory Address Base: 0x98040000
ROM Alternate Addr Base: 0x98020000
Lower I/O Address Base: 0x3100
Upper I/O Address Base: 0x3000

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI Bus Adapter on path 0/3 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/3


Product ID: PCI Bus Adapter
Hardware Path: 0/3
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for Fibre Channel Interface on path 0/3/1/0 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/3/1/0


Product ID: Fibre Channel Interface
Hardware Path: 0/3/1/0
Module Type: Bus Adapter
Vendor ID: 0x103c
PCI Device ID: 0x1029
PCI Subsystem Vendor ID: 0x103c
PCI Subsystem ID: 0x128c
Topology: Direct Fabric Attach (N_Port to F_Port)
Channel N_PORT_ID: 0x10900
N_Port Port World Wide Name: 50060B0000111B9C
N_Port Node World Wide Name: 50060B0000111B9D
Tachyon TL/TS Major Revision:2
Tachyon TL/TS Minor Revision:2
Memory Address Base: 0xb0040000
ROM Alternate Addr Base: 0xb0020000
Lower I/O Address Base: 0x6100
Upper I/O Address Base: 0x6000

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for SCSI Tape on path 0/3/1/0.1.29.255.0.0.0 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/3/1/0.1.29.255.0.0.0


Device Qualifier: HPUltrium
Product ID: Ultrium 1-SCSI Hardware Path:
0/3/1/0.1.29.255.0.0.0
Device Type: SCSI Tape Logical Unit Number: 0
Vendor: HP Product Rev Level: E38W
Firmware Revision: 007.047 Tape Load Count: 0
Correctable Errors: 0 Uncorrectable Errors: 0
Mfg Date Code: N/A Servo Revision: H/W.REV
Serial Number: HU76C00024
Compression Status: Enabled Compression Ratio:
[instant] N/A
[average] 1.0 : 1
Capacity [M Byte]: 0
Drive Status: Good

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for SCSI Tape on path 0/3/1/0.1.29.255.0.0.1 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/3/1/0.1.29.255.0.0.1


Device Qualifier: HPUltrium
Product ID: Ultrium 1-SCSI Hardware Path:
0/3/1/0.1.29.255.0.0.1
Device Type: SCSI Tape Logical Unit Number: 1
Vendor: HP Product Rev Level: E38W
Firmware Revision: 007.047 Tape Load Count: 0
Correctable Errors: 0 Uncorrectable Errors: 0
Mfg Date Code: N/A Servo Revision: H/W.REV
Serial Number: HUB6D048JK
Compression Status: Enabled Compression Ratio:
[instant] N/A
[average] 1.0 : 1
Capacity [M Byte]: 0
Drive Status: Good

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for SCSI Tape on path 0/3/1/0.1.30.255.0.0.0 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/3/1/0.1.30.255.0.0.0


Device Qualifier: HPUltrium
Product ID: Ultrium 1-SCSI Hardware Path:
0/3/1/0.1.30.255.0.0.0
Device Type: SCSI Tape Logical Unit Number: 0
Vendor: HP Product Rev Level: E38W
Firmware Revision: 007.047 Tape Load Count: 0
Correctable Errors: 0 Uncorrectable Errors: 0
Mfg Date Code: N/A Servo Revision: H/W.REV
Serial Number: HU72L12100
Compression Status: Enabled Compression Ratio:
[instant] N/A
[average] 1.0 : 1
Capacity [M Byte]: 0
Drive Status: Good

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for SCSI Tape on path 0/3/1/0.1.30.255.0.0.2 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/3/1/0.1.30.255.0.0.2


Device Qualifier: HPUltrium
Product ID: Ultrium 1-SCSI Hardware Path:
0/3/1/0.1.30.255.0.0.2
Device Type: SCSI Tape Logical Unit Number: 2
Vendor: HP Product Rev Level: E38W
Firmware Revision: 007.047 Tape Load Count: 0
Correctable Errors: 0 Uncorrectable Errors: 0
Mfg Date Code: N/A Servo Revision: H/W.REV
Serial Number: HUB7H0136X
Compression Status: Enabled Compression Ratio:
[instant] N/A
[average] 1.0 : 1
Capacity [M Byte]: 0
Drive Status: Good

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI Bus Adapter on path 0/4 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/4


Product ID: PCI Bus Adapter
Hardware Path: 0/4
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI Gigabit Ethernet Link on path 0/4/1/0 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/4/1/0


Product ID: HP A6825-60101 PCI 1000Base-T Adapter
Device ID: 0x1645
Revision ID: 0x0015
Vendor ID: 0x14e4 ( Broadcom Corporation )
Class Code: 0x020000 (Reserved)
Base Class: 0x0002 ( Network Controller )
Sub-Class/Interface: 0x00/0x00 ( Ethernet )
Device Status: 0x02b0
Bit 5: 66 MHz Capable
Bit 7: Fast Back-to-Back Capable
Bit 9-10: DEVSEL timing 01 - medium
Subsystem Vendor ID: 0x103c
Subsystem ID: 0x128a

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for PCI Bus Adapter on path 0/5 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 0/5


Product ID: PCI Bus Adapter
Hardware Path: 0/5
PCI Vendor ID: 0x103c
PCI Device ID: 0x122e

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for IPMI Controller on path 250/0 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 250/0


Product ID: IPMI Controller
Hardware Path: 250/0
PCI Vendor ID: 0x4950
PCI Device ID: 0x4930

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for RS-232 Interface on path 250/1 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 250/1


Product ID: RS-232 Interface
Hardware Path: 250/1
PCI Vendor ID: 0x504e
PCI Device ID: 0x5030

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for RS-232 Interface on path 250/2 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 250/2


Product ID: RS-232 Interface
Hardware Path: 250/2
PCI Vendor ID: 0x504e
PCI Device ID: 0x5030

=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=-+-=

-- Information Tool Log for ACPI Device on path 250/3 --

Log creation time: Tue Aug 5 16:56:14 2008

Hardware path: 250/3


Product ID: ACPI Device
Hardware Path: 250/3
PCI Vendor ID: 0x4143
PCI Device ID: 0x5049
-- Information Tool Log for each selected device --
View - To View the file.
Print - To Print the file.
SaveAs - To Save the file.
Enter Done, Help, Print, SaveAs, or View: [Done] #.
root@scar:/root:

[Torsten.]

Not really useful. ;-(

Now try this from your serial connection:

press "ESC" followed by "(" and "return".

I only did this from the EFI shell so far ...
but should also work with running OS - just be carful and don't reset the system by accident ;-)

You will get a prompt - type "se" now:

cli>se

Press ESC ) to close this session.



Example:

fs0:\> (
cli>help
CLI Commands:
C [] - Change Password
CON - Display Console selection
FPL - Read Forward Progress Log
H - Help (this text)
I - Send any IPMI message
req fmt: rsSA netfnlun chk1 rqSWID rqSeq cmd [data] chk2
resp fmt: rqSWID netfnlun chk3 rsSa rqSeqrsLun cmd ccode [data] chk4
INFO - Display BMC FW Revision
IPMI - Send any IPMI message
req fmt: netfnlun cmd [data]
resp fmt: ccode [data]
LOC [0,1] - Locator LED Control
P [0,1] - Power Control
Q - Quit/Logout
RS [s] - Reset System [and switch to sys console]
SD - Read SDR Repository
SE - Read System Event Log
TOC [s] - Send an INIT/TOC [and switch to sys console]

[Desmond Tiong]

Hi Boje,

If you check the power supply physically from the front panel and make sure the power LED is remained GREEN. Then it might not power supply issue.

Try to read the link below: (it's for 11.23 OE)

http://www12.itrc.hp.com/service/patch/patchDetail.do?admit=109447627+1217985843259+28353475&patchid=PHSS_37623

From the sentences 8 & 10, it did mentioned after update your OnlineDiag it will solve your current power supply issue.

8) SR QXCR1000592036
On all non-cellular IPMI based machines
the reminder events for power supply is
not getting generated by the
ia64_corehw monitor.

10)SR QXCR1000592627
On all non-cellular IPMI based machines
the ia64_corehw monitor when making the
GET_SENSOR_READING IPMI call on
sensor 0xCF is returning a reading of
0x02. This is resulting in generating
reminder event #104011(redundancy in
power), even though there is no problem
in the power units. Hence the monitor
should ignore the sensor 0xCF when
recheck of the sensor happens.


You hardly check the power supply status without MP. Through stm is another way to view through ps status but not all model will list the ps status out.


Hope it will help you. Thanks