HPE Community
Integrity Servers
1753779 Members
7562 Online
108799 Solutions
New Discussion юеВ

Re: RX2620 access MP via Serial Console?

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

тАО08-07-2008 12:19 AM

тАО08-07-2008 12:19 AM

Re: RX2620 access MP via Serial Console?

You will see a lot of FANs in your system.

LED status

any-any-green-red means CPU fan 0

This is the fan directly mounted on the CPU, you will need a new cpu module, because this is only 1 part.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
boje
Regular Advisor

тАО08-07-2008 12:30 AM

тАО08-07-2008 12:30 AM

Re: RX2620 access MP via Serial Console?

Yes thats what i thought.
I need to contact HP for a new fan. If i understand you correctly i will get a new fan and CPU mounted together.

Br Patrik
0 Kudos
Reply
boje
Regular Advisor

тАО08-08-2008 06:20 AM

тАО08-08-2008 06:20 AM

Re: RX2620 access MP via Serial Console?

Hi again!

I have now replaced one fan, service did not know if it was the right fan replaced. But i will check logs now for more errors. If so i will report to HP again. Thank you for all replies. Managed to access console CLI trough Serial cable.

Br
Patrik
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.