Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

RX2620 console configuration reset to default

 
Mynor Aguilar
Valued Contributor

RX2620 console configuration reset to default

Hello,
I modified some boot parameters for the console on EFI (I disabled the serial port and the vga port). I'm unable to get any imput from those two ports.
is there any way to reset the console settings to default? any jumper settings?

regards,
2 REPLIES 2
marsh_1
Honored Contributor

Re: RX2620 console configuration reset to default

mynor,

try the mp reset button on the back next to the mp status led's. hold for 4-5 seconds to reset to default values.

hope this helps

good luck

Torsten.
Acclaimed Contributor

Re: RX2620 console configuration reset to default

There is no really reset of these values that I'm aware of - what do you get from

Shell> bcfg dump boot

You may delete suspect entries and re-create.

The output from EFI should go to all destinations, serial port and VGA.

Do you remember what you have changed?
What server model is it?
What do you receive after a power cycle on the ports?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!